Audited Supplier
DIN 1.3816 X8CrMnN18-18
Alloy Steel Bar
AISI, ASTM, JIS, DIN, BS
Hot Rolled
Structural Steel Bar
Black,Grinded,Milled,Turned
Alloy
Free Cutting Steel
1.3816 X8crmn18-18 Hr Alloy Steel Round Bar
Hot Rolled, Forged, Eaf+Lf+Vd
Fob, CIF, CFR, Exwork, etc
by Sea, Air
Dia5-3000mm
T/T, L/C
2000-6000mm
363-429 Hbs
X8crmnn18-18
299MPa
BOZHONG or customized
Seaworthy Packing
Dia. 5-3000mm, length: 2000-6000mm
China
Product Description
DIN X8CrMnN18-18 hot rolled Alloy steel round bar
Chemical composition(mass fraction)(wt.%) of the 1.3816
Description
Austenitic, non-magnetic Mn-Cr-steel.
Applications
Non-magnetizable components in machine construction with high requirements concerning the yield strength, e.g. differents profile shapes and proof shafts for rotor forgings.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 195
Density [g/cm3]: 7.70
Coefficient of Linear Thermal Expansion 10-6 oC-1
Solution Heat Treatment
Harden from a temperature of 1020-1120oC followed by water or air quenching.
Forging
Hot forming temperature: 1150-950oC.
Mechanical properties
Yield
Rp0.2 (MPa)Tensile
Rm (MPa)Impact
KV/Ku (J)Elongation
A (%)Reduction in cross section on fracture
Z (%)As-Heat-Treated ConditionBrinell hardness (HBW)
Temperature
(°C)Modulus of elasticity
(GPa)Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) andThermal conductivity
(W/m·°C)Specific thermal capacity
(J/kg·°C)Specific electrical resistivity
(Ω mm²/m)Density
(kg/dm³)Poisson's coefficient, ν
Quality Assurance
Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET
Material Photos:
Company information:
Bozhong Group Mainly supply in forms of coil, sheet, plate, rod, bar, tube, pipe, beam, angle, flange, wire, strip, channel, etc., with various varieties, wide range of dimensions, high purity, stable chemical composition, high dimensional accuracy and excellent surface quality. The products are mainly used in the fields of industries such as automobile engineering, railway transportation, aviation, aerospace, machinery, petrochemical, energy, environmental protection, offshore, chemical, oil & gas, military, power plant, nuclear power, pressure vessel, boiler equipment, mold manufacture, etc.
steel coil
steel plate
steel sheet
steel bar/rod
steel round bar
steel flat bar
steel square bar
steel pipe/tube ( welded or seamless )
steel round pipes
steel square pipes
steel welded tubes
steel seamless tubes
steel strip
steel beam
steel angle
steel channel
steel flange
Steel wire
Bozhong Group can supply a variety of structural steel, high-strength steel, wear-resistant steel plate, boiler and pressure vessel steel, marine engineering and stainless steel plate in the thick steel and various European standard bars and pipes and profiles.Our global sales and service network throughout all around the world to ensure that the goods reach the customer in the shortest time.
We can follow your drawings and requirements, to provide you with oxygen cutting, plasma cutting and laser cutting and other processing services. You can also perform ultrasonic testing in accordance with EN10160 standard, EN10164 standard test Z15, Z25, Z35, weld bending detection, PWHT detection,etc.
We have ISO9001: 2000 quality management system certification, and obtain the quality certification from all the well-known certification company, including TuV / LRS / GL / CE and so on.
Special steel includes as below:
Boiler and pressure vessel steel
Pipeline steel
Bridge steel
Nuclear power steel
Structural steel
Die steel
High strength steel
Abrasion resistant steel
Weathering, corrosion resistant and fire resistant steel
High rise building steel
Shipbuilding and offshore engineering steel
FAQ:
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material don't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can you provide a sample for our testing before confirm the order?
A: Yes. We can provide sample to you for approval before you place an order to us. Free sample is available if we have stock.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
Customer visiting :
Warmly welcome! Pick up your phone and Call us!
Send us the inquiry here!
We will reply you at the first time.
Contact US:
Annie Wang
Direct Line:+86 - 21 - 5762 9195
Chemical composition(mass fraction)(wt.%) of the 1.3816
| C | Si ≤ | Mn≤ | P≤ | S≤ | Cr | Ni | Mo | Other |
| ≤0.12 | 1.00 | 17.5-20.0 | 0.060 | 0.030 | 17.5-20.0 | ≤1.00 | ------ | N 0.40-0.70 |
Description
Austenitic, non-magnetic Mn-Cr-steel.
Applications
Non-magnetizable components in machine construction with high requirements concerning the yield strength, e.g. differents profile shapes and proof shafts for rotor forgings.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 195
Density [g/cm3]: 7.70
Coefficient of Linear Thermal Expansion 10-6 oC-1
| 20-100oC | 20-200oC | 20-300oC | 20-400oC |
| 16.0 | 17.1 | 17.9 | 18.7 |
Solution Heat Treatment
Harden from a temperature of 1020-1120oC followed by water or air quenching.
Forging
Hot forming temperature: 1150-950oC.
Mechanical properties
Yield
Rp0.2 (MPa)Tensile
Rm (MPa)Impact
KV/Ku (J)Elongation
A (%)Reduction in cross section on fracture
Z (%)As-Heat-Treated ConditionBrinell hardness (HBW)
| 299 (≥) | 844 (≥) | 24 | 34 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 143 |
Temperature
(°C)Modulus of elasticity
(GPa)Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) andThermal conductivity
(W/m·°C)Specific thermal capacity
(J/kg·°C)Specific electrical resistivity
(Ω mm²/m)Density
(kg/dm³)Poisson's coefficient, ν
| 21 | - | - | 0.44 | - | |||
| 659 | 234 | - | 13.3 | 414 | - | ||
| 116 | - | 12 | 41.2 | 444 | 313 |
Quality Assurance
Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET
Material Photos:
Company information:
Bozhong Group Mainly supply in forms of coil, sheet, plate, rod, bar, tube, pipe, beam, angle, flange, wire, strip, channel, etc., with various varieties, wide range of dimensions, high purity, stable chemical composition, high dimensional accuracy and excellent surface quality. The products are mainly used in the fields of industries such as automobile engineering, railway transportation, aviation, aerospace, machinery, petrochemical, energy, environmental protection, offshore, chemical, oil & gas, military, power plant, nuclear power, pressure vessel, boiler equipment, mold manufacture, etc.
steel coil
steel plate
steel sheet
steel bar/rod
steel round bar
steel flat bar
steel square bar
steel pipe/tube ( welded or seamless )
steel round pipes
steel square pipes
steel welded tubes
steel seamless tubes
steel strip
steel beam
steel angle
steel channel
steel flange
Steel wire
Bozhong Group can supply a variety of structural steel, high-strength steel, wear-resistant steel plate, boiler and pressure vessel steel, marine engineering and stainless steel plate in the thick steel and various European standard bars and pipes and profiles.Our global sales and service network throughout all around the world to ensure that the goods reach the customer in the shortest time.
We can follow your drawings and requirements, to provide you with oxygen cutting, plasma cutting and laser cutting and other processing services. You can also perform ultrasonic testing in accordance with EN10160 standard, EN10164 standard test Z15, Z25, Z35, weld bending detection, PWHT detection,etc.
We have ISO9001: 2000 quality management system certification, and obtain the quality certification from all the well-known certification company, including TuV / LRS / GL / CE and so on.
Special steel includes as below:
Boiler and pressure vessel steel
Pipeline steel
Bridge steel
Nuclear power steel
Structural steel
Die steel
High strength steel
Abrasion resistant steel
Weathering, corrosion resistant and fire resistant steel
High rise building steel
Shipbuilding and offshore engineering steel
FAQ:
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material don't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can you provide a sample for our testing before confirm the order?
A: Yes. We can provide sample to you for approval before you place an order to us. Free sample is available if we have stock.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
Customer visiting :
Warmly welcome! Pick up your phone and Call us!
Send us the inquiry here!
We will reply you at the first time.
Contact US:
Annie Wang
Direct Line:+86 - 21 - 5762 9195
