Audited Supplier
DIN3354 Ductile Iron Cast Iron Non-Rising Stem Resilient Seated Gate Valves
1.Material list and Application:
1. Material :
| Body | Ductile Iron |
| Handwheel | Ductile Iron |
| Bonnet | Ductile Iron |
| Wedge | QT500-7 GGG50 with NBR,EPDM OR FPM coating |
| Stem | Stainless steel |
| stem nut | Brass |
| Middle Flange Washer | NBR/EPDM/FPM |
| O-Ring | NBR/EPDM/FPM |
| Support ring | ABS+EPDM |
| Design Standard: | BS EN1171/CJ/T216 According requirements of customer(s) |
| Socket ends: | Fitted with NBR/EPDM |
| Face to face dim | EN558-1/BS5163/GB12221 |
| Inspection & testing: | BS EN 12266-1,EN1074-2,GB13927 |
| Operator | Handwheel,Gearbox,,Thimble,Electric Actuator,Pneumatic |
| DN | 50-800 |
| PN | 1.0/1.6/2.5 Mpa |
| Coating | Fusion-bonded epoxy 200-250 microns inside and out side |
2.Application
The gate valve with socket ends can be applied to potable water systems,industries of foodstuff and medicine,industrial water supply and drainage and dispose of sewage as well as natural gas and gas and so on.
Qualification certificate
FAQ
1. Can I get free samples?
A: Yes, we can provide you the free samples, but you need to bear their own delivery costs.
2. Can I request to change the form of packaging and transportation?
A: Yes, We can change the form of the packaging and transportation according to your request, but you have to bear their own costs incurred during this period and the spreads.
3. Can I request to advance the shipment?
A: It should be depends on whether there is sufficient inventory in our warehouse.
4. Can I have my own Logo on the product?
A: Yes, you can send us your drawing and we can make your logo, but you have to bear their own the cost.
5. Can you produce the products according to my own drawings?
A: Yes, we can produce the products according to your drawings that will be most satisfy you.
6. Which price terms could accepted?
A: FOB,CIF all acceptable.
