DY-100B Tap Density Meter For Testing Powder With Two Glass tube

DY-100B Tap Density Meter For Testing Powder With Two Glass tube

Powder density is the mass per unit volume.it can be classified as bulk density and tap density by different measuring method.Tap density tester is to measure the density of powder has been tapped or packed by standardized and repeatable procedures according to international standards.

Introduction

DY-100A,B,C Powder density tester is based on GB/T5162-2006/ISO3953:1993(tap density measuring of metal powder).For non-metallic powder,This instrument extended seveal functions.such as"vibration

amplitude" from 3m standard extended to 1mm-15mm;"vibration frequency"from 100-300 times per minute extended to 0-300 times per minute."vibration times"from 3000 times standard extended to 0-99999

times.All of them can be setup freely.

DY-100A,B,C Powder density tester consist of adjustable-speed motor,vibration assembly,micro-computer and micro printer.,etc.It has the feature of compact structure,stable,and easy operation.,etc.

Specification
 

• Weight of testing object:<=500.00g
• Volume of testing object:<=250.00ml(standard accessory including 25ml,50ml,100ml,250ml measuring cylinder)
• Single vibration times:<=0-99999 times(the result will come out as bulk density when input zero times)
• Allowable motor force:0.86 N.m.
• Vibration frequency:maximum 300 round per minute(0-300 round per minute is adjustable,USA pharmacopeia standard is 300 round per minute)
• Vibration amplitude:maximum 15mm(1mm-15mm is adjustable,International standard is 3mm)
• Repeatability error:<=1%
• Accuracy error:<=1%