Audited Supplier
OMS/OMSY 80/100/125/160/200/250/315/400/475cc
CE
18kw
8
Low Speed
Hydraulic Motor
Disc Distribution Flow
Geroler Gear Set
Cast Iron
470rpm
316nm
15.5kw
15MPa
Square/Rhombic/Elliptical
32mm/31.75
Blince
Plastic Tube +Carton+Wooden Pallets
CE, CCC, ISO
Dongguan, China
8412291000
Product Description
Danfoss OMS 80/100/125/160/200/250/315/400/475cc Hydraulic Motor
Product Description
BMS series motor adapt the advanced Geroler gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accoredance with requirement of applications.
Advantages:
Low pressure start;
Reinforced shaft seal;
High startup torque and ability to withstand significant back pressures;
The ability totransferaxial and radial loads;
Compact volume and easy installation.
If you are interested in our products, please feel free to contact us below:
Product Description
BMS series motor adapt the advanced Geroler gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accoredance with requirement of applications.
Advantages:
Low pressure start;
Reinforced shaft seal;
High startup torque and ability to withstand significant back pressures;
The ability totransferaxial and radial loads;
Compact volume and easy installation.
| Data sheet | ||||||||
| type | oms omss | oms omss | oms omss | oms omss | oms omss | oms omss | oms omss | oms omss |
| displacement | 80 | 100 | 125 | 160 | 200 | 250 | 315 | 375 |
| speed | 800 | 748 | 600 | 470 | 375 | 300 | 240 | 200 |
| torque | 190 | 240 | 310 | 316 | 400 | 450 | 560 | 536 |
| output | 15.9 | 18.8 | 19.5 | 15.6 | 15.7 | 14.1 | 14.1 | 11.8 |
| pressure | 17.5 | 17.5 | 17.5 | 15 | 14 | 12.5 | 12 | 10 |
| flow | 65 | 75 | 75 | 75 | 75 | 75 | 75 | 75 |
| inlet pressure | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| weight | 9.8 | 10 | 10.3 | 10.7 | 11.1 | 11.6 | 12.3 | 12.6 |
| OMSY / OMSYS series Orbital Hydraulic Motor | |
| Displacement | 80cc,100cc,125cc,160cc,200cc,250cc,315cc,400cc,475cc |
| Flange: | E2: 2-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3 E4: 4-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3 F6: 6-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×2.6 W: 4-Ø13.5 Wheel-flange Ø160 ,pilot Ø125×8 E2B: 2-Ø14.3 Rhomb-flange Ø146.05,pilot Ø101.6×9.4 SP: 4-Ø11.5 Square-flange Ø106.4,pilot Ø82.5×6.3 D: 4-Ø11 Circle-flange Ø125 ,pilot Ø100×6 E: 4-Ø13.5 Square-flange Ø127 ,pilot Ø101.6×6.3 |
| Output Shaft: | A: Shaft Ø25 , parallel key 8×7×32 B: Shaft Ø32 , parallel key 10×8×45 D:Shaft Ø25.4 , parallel key6.35×6.35×25.4 G: Shaft Ø31.75 ,parallel key 7.96×7.96×31.75 F: Shaft Ø31.75 ,splined tooth 14-DP12/24 FD: Long Shaft Ø31.75 ,splined tooth 14-DP12/24 SL: shaft Ø34.85,Splined key 6-34.85×28.14×8.64 T1: Cone-shaft Ø35 ,parallel key B6×6×20 T3: Cone-shaftØ31.75 ,parallel key 7.96×7.96×31.75 S1: Shaft Ø25.4 ,splined tooth SAE 6B I: Sub-shaft Ø22,splined tooth 13-DP16/32 |
| Port and drain port: | D: G1/2 Manifold Mount 2-M10 , G1/4 M: M22×1.5 Manifold Mount 2-M10 , M14×1.5 S: 7/8-14UNF O-ring manifold 2-3/8-16 , 7/16-20UNF P: 1/2-14NPTF manifold 2-3/8-16UNC , 7/16-20UNF |
If you are interested in our products, please feel free to contact us below:
