Audited Supplier
DLPP
PP
Industry, Food and Beverage, Medicine, Sterile Filtration
Pre-Filtration
DOE/222/226
PRE Filter
1/5/10/25/50/75/100μm
63 or 115mm or up to Customers' Request
9.75", 9.87", 10", 20", 30", 40"
Outside to Inside
1 Year
Blueflo
Silicon/EPDM/NBR/Viton
28mm
Darlly
POF/ Shrink Wrapped/Polybag
SGS
Zhejiang, China
84219990
Product Description
Darlly Melt Blown Polypropylene Filter Cartridge
Three Layers PP Melt Blown Sediment Pre-filter
DLPP series Melt Blown Filter Cartridge is the standard one of Darlly melt blown filter cartridge series. It is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong particulate holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.
Features
- Three layers structure cartridge offers high dirt holding capacity,longerservice life
- Formed by thermal bond without using any binders and adhesives.
- 100% Pure Polypropylene will not cause any pollution to water
- Wide Chemical compatibility
- Groove design to extend the filtration surface area.
- All kinds of adaptors are available.
- FDA compliance material
Specifications
Three Layers PP Melt Blown Sediment Pre-filter
DLPP series Melt Blown Filter Cartridge is the standard one of Darlly melt blown filter cartridge series. It is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong particulate holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.
Features
- Three layers structure cartridge offers high dirt holding capacity,longerservice life
- Formed by thermal bond without using any binders and adhesives.
- 100% Pure Polypropylene will not cause any pollution to water
- Wide Chemical compatibility
- Groove design to extend the filtration surface area.
- All kinds of adaptors are available.
- FDA compliance material
Specifications
| Outside Diameter | 63mm, 115mm or up to customers' request |
| Inside Diameter | 28mm,30mm |
| Length | 9.75",9.87",10, 20, 30, 40, 50, 60 |
| Filter media | PP |
| End caps | PP |
| Cores | PP |
| Gaskets/O-ring | Silicone, EPDM, NBR, Viton |
| End Cap Type | DOE/222 FLAT/222 FIN/ 226 FLAT/ 226 FIN |
| Removal Rating | 1/3/5/10/25/50/75/100/150 μm |
| Max. Operating Temperature | 65ºC |
| Max. Operating DP | 2.0 Bar@21ºC |
