Audited Supplier
Delta servo motor driver price 11KW 15KW 18.5KW 22KW 30KW 37KW 45KW 55KW 75KW
Why need servo control system:
When using a hydraulic system, the power consumption is more than 75% of the whole injection system. Different pressures and flows are requireed during the process, including mold closing, injection, holding pressure and mold opending. When the flow and pressure requirements exceed the settings, the relief or proportional valve will be adjusted, resulting in a 40%-75% higher power consumption.
The servo control system advantages:
1. Ultra energy saving:
Save up to 60% compared traditional injection molding machine(60%) fixed displacement
depend on the different injection conditions, can save up to 80% at the most.
2. Low system temperature
decrease system temparature by 5-10°C to save cooling costs.
3. Highly accurate repeatability
result in accurate control of flow and pressure
4. Long pressure holding time: benifit to thick product manufacture
5. Good frequency response rate: up to 50 ms
NVICKS standard configurations:Pump displacement mL/r | Pressure Mpa | Max Speed r/min | Sumitomo pump Model | Delta servo driver | Phase Servo Motor | Pump Stand shaft Coupling | Pressure Sensor | Proportion Valve | Signal Coverting Board |
32 | 14 | 2000 | QT42-31.5 | VFD110VL43C-J 11KW | 1005F17.3 10KW | BTJ-01 | Italy GEFRAN | 03 small size | 0-1A to 0-10V |
40 | 14 | 2000 | QT42-40 | VFD150VL43C-J 15KW | 1007F17.3 14KW | BTJ-01 | Italy GEFRAN | 03 small size | 0-1A to 0-10V |
50 | 14 | 2000 | QT52-50 | VFD185VL43C-J 18.5KW | 1008F17.3 17.6KW | BTJ-02 | Italy GEFRAN | 03 small size | 0-1A to 0-10V |
63 | 14 | 2000 | QT52-63 | VFD220VL43C-J 22KW | 1010F15.3 20KW | BTJ-02 | Italy GEFRAN | 03 small size | 0-1A to 0-10V |
80 | 14 | 2000 | QT62-80 | VFD300VL43C-J 30KW | 1013F17.3 28.7KW | BTJ-06 | Italy GEFRAN | 06 Big size | 0-1A to 0-10V |
100 | 14 | 2000 | QT62-100 | VFD370VL43C-J 37KW | 1315F15.3 29KW | BTJ-06 | Italy GEFRAN | 06 Big size | 0-1A to 0-10V |
125 | 14 | 2000 | QT62-125 | VFD450VL43C-J 45KW | 1320F17.3 39.4KW | BTJ-07 | Italy GEFRAN | 06 Big size | 0-1A to 0-10V |
1. Top Quality
Depend on 15 years experience at pumps design and manufacturing, we have a top quality compared with domestic and overseas manufacturers, all of our products are with 1 year warranty time.
2. Strict Quality Control System
We have the most strict quality control system, all of our products are 100% tested before shipment and each of them has one tracking code in order to make sure they are with good quality to our customers.
3. Advanced machinery equipment
All the machines are new CNC machines we imported from Germany and Japan in order to reach more higher demand at the products accuracy.
4. Strong Technical team
Our technical team all have more than 20 years experience at pumps design and engineering, our chief engineer has more than 40 years experience at pumps design. We have one 15 persons research team, responsible for pumps improvement research and new products development.
5. Competitive Price
Because of good management, our price is more competitive than the original products, more reasonable than most of the domestic suppliers.
6. Fast Delivery time
We can ship small orders within one week, for big orders such as within 100 sets of servo systemsusually we can make shipment within one month.
7. Warranty Period
All of our products are within 1 year warranty period after the shipment from our factory.
8. Considerate Service
We can provide technical support at any time if our customers meet any issue during the using, we will provide solutions at the soonest time.
9. Long development strategy
We would like to establish a long time strategy cooperation relationship with our customers, to promote Albert brand together, support and train the potential customer to be our agent at each country and region all over the world.
