Audited Supplier
UL-AR432
Oral Rehabilitation Department
ISO, CE
Dental Health Materials
PMMA
0#, 1#, 2#, 3#, 4#
500ml
Heat Curing
Liquid
Carton Case
China
9018490000
Product Description
Denture Material Dental Monomer Acrylic Liquid heat curing
Type: heat curing
Specification: 500ml/bottle
Product introduction: Used for denture repair, base repair, and repair of lost artificial teeth.
Denture Material Dental Monomer Acrylic Liquid heat curing Instructions for use:
1. It is recommended to operate and use it in an environment with a temperature of 23°C±2°C and a relative humidity of 50%±10%.
2. Powder-liquid mixing: The recommended powder/liquid ratio is 22g (10±0.5)g. Stir gently to avoid artificial bubbles.
3. Static swelling: The powder-liquid mixing changes over time as follows: wet sand stage → paste stage → sticky silk stage → dough stage → rubber stage.
4. Heating and curing: Heat curing is required. Immerse the mold box in cold water (the water level must be higher than the box surface), gradually heat to 100°C, leopard pattern for 20 minutes, and wait for it to completely cool before modifying and polishing. The dry heat curing principle is the same.
5. The initial boxing time is 20-35 minutes, and the final boxing time is 45-55 minutes.
6. It is recommended to use conventional separating agents
7. It is recommended to use metal denture boxes, hard plaster, and general hydrocolloid impression materials.
Product features:
1. High-quality raw materials: The main component of the powder is polymethyl methacrylate, which has the advantages of large and uniform molecular weight, small powder particles, and moderate operation.
2. Outstanding reliability: The denture base produced has good flexural strength, crack resistance and impact toughness, small polymerization shrinkage, and less residual monomers after polymerization, which greatly improves the service life of the denture base.
3. Good biosafety: Using internationally certified safe pigments and blood fiber (anti-coloration), a variety of base colors can meet the needs of patients with different gum colors.
