Audited Supplier
K
Bare
Solid
Heating
Ni Cr Si
No
Bare
Round Wire
Heating, Temperature Measurement
ISO9001, RoHS
Liqun
K
0.2-3.2mm
Nickel Chromel
Nickel Silicon
Yes
100kg
Liqun
Plywood Cases
3.2/2.5/2.0/1.29/0.813/0.5/0.3/0.2mm
China
75052200
Product Description
Diameter 2.5mm Type K Thermocouple Alloy Wire
Type K has a better resistance to oxidation than other types of thermocouple (except type N) and is particularly recommended for oxidizing or inert atmospheres.It should not be used without protection in sulphurous atmospheres, in reducing atmospheres or a long time in a vacuum.Must be protected from sulfurous and marginally oxidizing atmospheres. Reliable and accurate at high temperatures.
| Product | Chemical Composition/% | Density (g/cm3) | Melting point (ºC) | Resistivity (μΩ.cm) | Tensile Strength (Mpa) | ||
| Ni | Cr | Si | |||||
| KP(+) Nickel Chrome | 90 | 10 | - | 8.7 | 1427 | 70 | >490 |
| KN(-) Nickel Silicon | 97 | - | 3 | 8.6 | 1399 | 29 | >390 |
| Alloy wire Dia/mm | The long-term operating temperatures/°C | The short-term operating temperatures/°C |
| 0.3 | 700 | 800 |
| 0.5 | 800 | 900 |
| 0.8,1.0 | 900 | 1000 |
| 1.2,1.6 | 1000 | 1100 |
| 2.0,2.5 | 1100 | 1200 |
| 3.2 | 1200 | 1300 |
| Operating temperatures/°C | Nominal value of thermoelectric EMF | Level I | |
| Tolerance | Range of EMF | ||
| 100 | 4 096 | ±46 | 4 050-4 142 |
| 200 | 8 138 | ±44 | 8 094-8 182 |
| 300 | 12 209 | ±50 | 12 159-12 259 |
| 400 | 16 397 | ±68 | 16 329-16 465 |
| 500 | 20 644 | ±85 | 20 559-20 729 |
| 600 | 24 905 | ±102 | 24 803-25 007 |
| 700 | 29 129 | ±117 | 29 012-29 246 |
| 800 | 33 275 | ±131 | 33 144-33 406 |
| 900 | 37 326 | ±144 | 37 182-37 470 |
| 1000 | 41 276 | ±156 | 41 120-41 432 |
| 1100 | 45 119 | ±167 | 44 952-45 286 |
| 1200 | 48 838 | - | - |
| 1300 | 52 410 | - | - |
Q1.What is the nature of the company?
A: We are a production enterprise, our company has its own factory.
Q2. What is the MOQ of an order of your company?
A: Our company's MOQ is 100 kg for each type of product.
Q3.Can I get a sample before mass production ?
A: Sample is free,the shipping cost of the sample is paid by the customer .
Q4.How long is the mass production cycle of product?
We will end the production within 15-20 days after receiving the deposit.
Q5.What payment method does your company support?
A: We can accept T/T, L/C ,you can choose the one which the most convenient or most effective for you .
A: We are a production enterprise, our company has its own factory.
Q2. What is the MOQ of an order of your company?
A: Our company's MOQ is 100 kg for each type of product.
Q3.Can I get a sample before mass production ?
A: Sample is free,the shipping cost of the sample is paid by the customer .
Q4.How long is the mass production cycle of product?
We will end the production within 15-20 days after receiving the deposit.
Q5.What payment method does your company support?
A: We can accept T/T, L/C ,you can choose the one which the most convenient or most effective for you .
