Audited Supplier
3522110
Natural Rubber
Industrial Rubber Slab, Industrial, Flooring, Rubber Floor Covering, Coal Mine Conveyor
Wear-resistant, Impact-resistant, Heat-resistant, Corrosion-resistant, Insulating, Cold-resistant, Increased Friction
Natural Rubber, Pad
Pure Gum Rubber Sheet and Fabric
Insulation and Corrosion Resistant Rubber Sheet
Black Rubber Sheet
Natural Rubber
Industrial Rubber Slab, Industrial, Conveyor Pulley Lagging
Wear-Resistant, Impact-Resistant, Heat-Resistant, Corrosion-Resistant, Insulating
Pure Gum Rubber Sheet and Fabric
Black Rubber Sheet
Natural Rubber + SBR
Wear Resistant
High Wear Resistant Rubber Lagging Material Diamon
450%
8mm, 10mm, 12mm, 15mm, 20mm, etc.
20 Years Manufacturer, 18 Years Exportor
Iron Ore, Mining, Quarrying, Cement
Diamond Rubber Lagging
Reduce Belt Slippage, Extend Pulley Service Life
Cold Bonding, Rubber Sheet with Cn Bonding Layer
Increase Coefficient Friction Between Conveyor
65 Shore a
2000mm
100mm3
10m
BAI-OTT
Pallet
2m*10m per roll
China
4008210000
Product Description
Mining conveyor pulley rubber lining wear resistant drum lagging sheet
BAI-OTT offers a comprehensive range of diamond Pulley Lagging Rubber Sheet to suit every conceivable conveyor installation. The Pulley Lagging Rubber Sheet offered by BAI-OTT are produced in different thicknesses, rubber qualities and patterns to ensure selection of the most appropriate type, to suit all application requirements.
The Pulley Lagging Rubber Sheet offered by BAI-OTT come with CN Bonding Layers for better adhesion levels as also with buffed surface. The profiled patterns on the top surface, in diamond or square embossing improve belt grip and tracking on conveyors, while reducing belt wear. The Pulley Lagging Rubber Sheet is available in various grades of rubber, including FRAS and oil resistant grades.
The Pulley Lagging Rubber Sheet offered by BAI-OTT come with CN Bonding Layers for better adhesion levels as also with buffed surface. The profiled patterns on the top surface, in diamond or square embossing improve belt grip and tracking on conveyors, while reducing belt wear. The Pulley Lagging Rubber Sheet is available in various grades of rubber, including FRAS and oil resistant grades.
Features:
1.Improve friction coefficient between drive pulley and conveyor belt
2.Minimizing of conveyor belt slip
3.Prevent material build-up
4.Protection against wear and corrosion.
5.To balance wear resistance and elasticity of the rubber, Bai-ott tested many formula to get the suitable one.
| Standard thickness mm | Standard width mm | Standard length mm |
| 8 | 2000 | 10000 |
| 10 | 2000 | 10000 |
| 12 | 2000 | 10000 |
| 15 | 2000 | 10000 |
| 20 | 2000 | 10000 |
Further dimensions on demand.
