Audited Supplier
Product Description
The JXM-A series of dosing pumps offer the high performance with the capacity up to 1200L/H and with outstanding values for pressure applications up to 12 Bar. This series dosing pump is designed for durability and cost-effective, which is welcome to be used in lots of lines, such as the water treatment, chemical industry, power industry, food industry and beverage industry, paper industry, textile industry etc.
Technical Specifications
★Flow rates up to 500L/H, pressure up to 12 Bar
★Adjustment of flow rate from 0% - l00%while running or stopped
★Accuracy +/- 2% of 100% rated flow
★Mechanically actuated PTFE diaphragm
★Maximum temperature of pumped fluid: +10°C - 40°C
★Maximum suction up to 2M
Features&Benefits
★Mechanical actuated diaphragm design, easy operation and with the convenience maintenance
★Changeable eccentric drive, structure.
★Rugged construction designed to withstand tough environments
★Oil bath lubrication for all of drive components
★Various pump head material (PVC, PVDF, SS304, SS316 etc.) to meet different solution needs
★Available with the manual control and digital control model
Control
★Manual stroke adjustment
★Stroke actuator with 4-20mA signal
★Digital controller with 4-20mA signal
Others
★The pump can be used to deliver the solution which is high-viscosity,corrosive and dangerous
★Diaphragm rupture detection system(Double diaphragm) is optional.
| Model | Rated Flow Rate (L/H) | Rated Pressure (Mpa) | Stroke (mm) | Speed (spm) | Diaphragm (mm) | Connection (mm) | Motor (KW) | Weight (Kg) |
| JXM-A 2.25/1.2 | 2.25 | 12 | 12 | 36 | 63/36 | DN8 | 220V/380V 0.37KW 1400RPM 50/60HZ IP55/F | 18 |
| JXM-A4.5/1.2 | 4.5 | 72 | ||||||
| JXM-A 10/1.2 | 9 | 144 | ||||||
| JXM-A 22/12 | 22 | 4 | 72 | 82/45 | DN15 | |||
| JXM-A 44/1.2 | 44 | 144 | ||||||
| JXM-A 85/1.0 | 85 | 1.0 | 6 | 72 | 110/70 | |||
| JXM-A 120/0.7 | 120 | 0.7 | 8 | 72 | ||||
| JXM-A 170/0.7 | 170 | 6 | 144 | |||||
| JXM-A 240/0.7 | 240 | 8 | DN25 | |||||
| JXM-A 315/0.5 | 315 | 0.5 | 110/80 | 0.55KW | ||||
| JXM-A 400/0.5 | 400 | 10 | ||||||
| JXM-A 500/0.5 | 500 | 180 |
| Capacity (LPH) | PVC head | ||
| A/B | C | D | |
| 2.25-9 | 102 | 121 | 291 |
| 22-44 | 124 | 121 | 299 |
| 85-170 | 137 | 137 | 360 |
| 240-500 | 142 | 142 | 378 |
| Capacity (LPH) | SS head | ||
| A/B | C | D | |
| 2.25-9 | 102 | 121 | 289 |
| 22-44 | 115 | 121 | 299 |
| 85-170 | 169 | 130 | 352 |
| 240-500 | 178 | 142 | 355 |
| Capacity (LPH) | Connection | |
| PVC head | SS head | |
| 2.25-9 | DN8 PVC Connection | DN8 Thread |
| 22--170 | DN15 PVC Connection | DN15 Thread |
| 240-500 | DN15 PVC Connection | DN25 Thread |
| I II III IV V | |||||
| Pump head | SS304 | SS316 | PVDF | PVC | PTFE |
| diaphragm | PTFE | PTFE | PTFE | PTFE | PTFE |
| Valve ball | Ceramic,SS304 | Ceramic,SS316 | Ceramic | Ceramic | Ceramic |
| Valve seat | SS304 | SS316 | PVDF | PVC | PTFE |
| Valve cover | SS304 | SS316 | PVDF | PVC | PTFE |
| Valve gasket | FPM/PTFE | FPM/PTFE | FPM/PTFE | FPM/PTFE | FPM/PTFE |
Special Available Requirements
| Code | GN | YB | B | D1 | D2 | XF |
| Specification | PTFE/EPDM | Diaphragm rupture alarm | Explosion-proof motor | Stroke actuator | Digital control | Suspension |
