Audited Supplier
JetTouch
1year
1year
Wrapping
Particle Board, Fiberboard, Plywood, Aluminium Plate, Packaging Paper, Film Material, Color Printing, Soft Board
Electric
Automatic
Light Membrane
Cutting
Waterproof
6700X1600X1800mm
208-240V
300 S/H
1200kgs
530X760mm
320X464mm
LED UV
Cold Foil
EcooGraphix
Wooden Case
50x50x100cm
China
844230
Product Description
Digital B2 760mm UV spot Varnishing and Foiling machine
Introduction:
Material usage:
Main structure of the machine:
1.Control System
PLC control
Photo-eye auto-height sensing pallet height
Separate top, bottom & up-down Wrap Counter options
Overwrap time is up to create an overwrap
Reinforce wrap times is set to better secure 2 loads placed on top of each other
Film Tension Control adjustment on the panel
Separate start, pause and emergency stop buttons
Power indicator
Manual carriage up/down
Variable Turntable Speed
Carriage up/down speed control
Manual/automatic exchangeable
2.Turntable
1650mm Diameter Structural steel plate
85mm Height floor to top of turntable
3.Turntable drive
0-12rpm variable turntable speed by frequency changer
Position turntable alignment
Soft start
4.Film carriage
Powered pre-stretch system up to 250% to min film consumption
Film delivery variable speed by separate DC Drive Motor
Electronic film tension control adjustment on panel
Film dancer-bar with variable speed output
5.Film carriage Drive
Heavy duty double-chain carriage lift, calm and safety
Film carriage variable speed by frequency changer
6,Weighing system:
Use separate power supply 220V;
Electronic weighing system and machine can be used independently;
The cargo cannot exceed the maximum weight supported by the machine, otherwise, the electronic scale will fail;
The calculation error is ± 1/2000 (take two tons as an example),
Range: 2 tons
Weighing system: Zhejiang Keli
Weighing display: China Hongtai
7,Main components and electrical performance characteristics of the major components
FAQ
What's your advantage? Why we choose you?
A1:We have the most professional techniques and team, according to the customer requirements, we supports customized machine.
A2:We are a professional manufacturer and warmly welcome clients from worldwide to visit our factory and cooperate with us.
Warranty of the machine?
One year warranty except the consuming spare parts .
What is the service?
7 days 24 hours on line service, engineer oversea service is also available if necessary.
What is the delivery terms ?
FOB Shanghai, CNF destination port under LCL and FCL is available.
What is the delivery time?
45 working days after the confirmation of the order.
Any More Information, Please Feel Free To CONTACT:
Introduction:
Started from 2000 March, EcooGraphix always focus on the industrial trend and new
developments in digital printings finishing, we are able to respond to these developments and
offer the best affordable solution for spot UV coating and digital stamping without mold or
plate ,in short run and medium run finishing.You can do spot UV and cold foil directly from the
computer to the printings.It can creates 3D effects and metallic lustre for printings.
Now we have A3+ and B 2 models and we can customize according to your
requirement.OEM/ODM project is acceptable.
With our JetTouch products ,make your value "Touchable"and make your
dream "Affordable".
Digital UV cold stamping machine D series does not need any mold or plate, through
multiple printing or stamping on the surface of the printed matter, it can easily complete the
3D UV and digital stamping effect on the surface of the printed matter.
| Model No | JetTouch B2 |
| Min. Paper size | 320x464mm |
| Max. Paper size | 530x760mm |
| Max. Coating width | 530mm |
| Printings thickness | 157gsm ~ 450gsm |
| Print head | 3pcs Konica 1024i print heads(8 heads optional) |
| Substrate | Offset and Digital printing materials, Plastics, Laminated and coated substrates, PVC, PET metal, etc |
| Coating Thickness | 10μm-100μm |
| Coating Speed | 300 S/H(B2)1200S/H(A4) |
| Registration System | CCD optical registration registration precision± 200μm |
| Resolution | 1080DPI,720DPI,360DPI |
| File Format | PRT ,TIFF, PDF |
| Max Stacking Height | 600mm |
| Max. length of foil | 500m |
| Dimensions | 6700x1600x1800mm |
| Weight | 1200kgs |
| Power supply | 12KW 380V 50HZ |
Material usage:
Characteristic
Coating Process:
Empty the air and spray the coating for preparation before UV coating. Spot coating and /or Cold Foil
Stamping continually Inkjet heads move to seal covers for protection,avoid light and dust.
Cold stamping Technology:
Foil stamp apply only on the area where there is coating.
There is foil-save design in cold foil station.When the stamping area is very small, the foil can pull back and
use the foil again to lower down production cost.
Digital Spot UV:
With DoD inkjet heads, you can do spot UV directly from computer file to the printings, easy and fast.
3D effect:
In one pass, you can make different thickness of coating from 10 micron to 100 micron, good for
personization design.
Digital stamping:
Without die or plate, you can do stamping directly from computer file to the printings, saving the time and
cost of making plate.
Multiple stamping:
With several pass, you can do multiple stamping to bring glittering effect to the printings. It can have
stamping effect and spot UV in one printing.
Applications:
Business cards, personalized packaging, book covers, greeting cards, magazines, invitations, posters,
product posters, labels, ceramics, metal products, desk calendars, etc.
Main structure of the machine:
1.Control System
PLC control
Photo-eye auto-height sensing pallet height
Separate top, bottom & up-down Wrap Counter options
Overwrap time is up to create an overwrap
Reinforce wrap times is set to better secure 2 loads placed on top of each other
Film Tension Control adjustment on the panel
Separate start, pause and emergency stop buttons
Power indicator
Manual carriage up/down
Variable Turntable Speed
Carriage up/down speed control
Manual/automatic exchangeable
2.Turntable
1650mm Diameter Structural steel plate
85mm Height floor to top of turntable
3.Turntable drive
0-12rpm variable turntable speed by frequency changer
Position turntable alignment
Soft start
4.Film carriage
Powered pre-stretch system up to 250% to min film consumption
Film delivery variable speed by separate DC Drive Motor
Electronic film tension control adjustment on panel
Film dancer-bar with variable speed output
5.Film carriage Drive
Heavy duty double-chain carriage lift, calm and safety
Film carriage variable speed by frequency changer
6,Weighing system:
Use separate power supply 220V;
Electronic weighing system and machine can be used independently;
The cargo cannot exceed the maximum weight supported by the machine, otherwise, the electronic scale will fail;
The calculation error is ± 1/2000 (take two tons as an example),
Range: 2 tons
Weighing system: Zhejiang Keli
Weighing display: China Hongtai
7,Main components and electrical performance characteristics of the major components
FAQ
What's your advantage? Why we choose you?
A1:We have the most professional techniques and team, according to the customer requirements, we supports customized machine.
A2:We are a professional manufacturer and warmly welcome clients from worldwide to visit our factory and cooperate with us.
Warranty of the machine?
One year warranty except the consuming spare parts .
What is the service?
7 days 24 hours on line service, engineer oversea service is also available if necessary.
What is the delivery terms ?
FOB Shanghai, CNF destination port under LCL and FCL is available.
What is the delivery time?
45 working days after the confirmation of the order.
Any More Information, Please Feel Free To CONTACT:
Ms.Merry Tao
Hangzhou EcooGraphix Digital Technology Co.,LTD
Hangzhou EcooGraphix Digital Technology Co.,LTD
