Audited Supplier
ZC0004
CE
Customized
SWR
China
9023009000
Product Description
ZC0004 Multirange Current Sensor is used to measure the current in circuit, can be used in DC circuit and low voltage AC circuit.
Specification
| Range | -3A~+3A / -300mA~+300mA |
| Resolution | 0.002A / 0.2mA |
| Accuracy | ±1%F.S |
Typical experiment
Measure the electrodynamic potential and internal resistance of battery
VA characteristics of small bulb, diode and conductor
Ohm's law
Serial-parallel circuit of resistance
Usage
Connect the Multirange Current Sensor to computer by USB cable.
Open the SWR iLab V8.0 software.
Click 'New' to create new experimental template.
Notes
- The Multirange Current Sensor needs calibration before use, the method please refer to the 'Calibration'.
- The Multirange Current Sensor should series connect to circuit.
- The current goes into the sensor from the red conducting wire, and goes out from the black conducting wire and it shows a positive value, or it will show a negative value.
- When measuring, please do not make the measured current exceeds the range of the sensor.
