Audited Supplier
STC-3028
Customized
RoHS, ISO9001, CE
Shtrol
LCD
SHTROL
43*33*42cm
77*34.5*85mm
Xuzhou Jiangsu China
90321000
Product Description
Product Description
Switch the modes between cool and heat;Control temperature by
setting the temperature setting value and the difference value;
Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds, temperature limit or when sensor error.
Feature
Be able to control temperature and humidity at the same time.
Be able to connect with humidifier and dehumidifier equipment at the same time.
Be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time.
Heating/Cooling function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity Control. Supporting Temp and Humidity Calibration
Be able to display measured temperature/humidity and set temp/humidity at the same time
Specification
Iput voltage: AC110~220V* 10%, DC24V, DC12V
Measuring temperature range: -20 ~ +80°C
Measuring humidity range: 00%RH~+100%RH Accuracy: ±1, 0. 1%RH
Relay output contact capacity: 10A/240VAC Sensor length: 1m
Set start up temperature(humidity):
Press the "up" button once to display the starting temperature(humidity). Long press the "up" button for about 3 seconds.The required temperature(humidity) can be set by the up and down key.
Switch the modes between cool and heat;Control temperature by
setting the temperature setting value and the difference value;
Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds, temperature limit or when sensor error.
Feature
Be able to control temperature and humidity at the same time.
Be able to connect with humidifier and dehumidifier equipment at the same time.
Be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time.
Heating/Cooling function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity Control. Supporting Temp and Humidity Calibration
Be able to display measured temperature/humidity and set temp/humidity at the same time
Specification
Iput voltage: AC110~220V* 10%, DC24V, DC12V
Measuring temperature range: -20 ~ +80°C
Measuring humidity range: 00%RH~+100%RH Accuracy: ±1, 0. 1%RH
Relay output contact capacity: 10A/240VAC Sensor length: 1m
Set start up temperature(humidity):
Press the "up" button once to display the starting temperature(humidity). Long press the "up" button for about 3 seconds.The required temperature(humidity) can be set by the up and down key.
