Digital Temperature Controller (TDW-2001/2)

1. Display method: LED display directly
2. Basic error: ≤ 1.0%FS± 1
3. Fixed point error: ≤ 1.0%FS
4. Cold end compensating deviation: 0~50 deviation<2
5. Time proportional adjustment: Scope 1%~3%, period: 30S± 10S
6. Output contact capacity: AC 220V 3A(resistance load)
7. Power Supply: 90VAC-242VAC, 50Hz/60Hz
8. Power consumption less than 3W
9. Work environment: Temperature 0~50.0, relative humidity85%RH, without corrode.

Model meaning
X M  (1)(2) -   (3)(4)(5)(6)    
             
1:Display control method:"T" temperature controller;"Z" single display instrument

2:Size
Empty:160×80×50  Installation hole 152×76;        A:96×96×150   Installation hole 92×92
B:60×120×150  Installation hole 56×116;        D:72×72×110  Installation hole 68×68
E:48×96×110   Installation hole 44×92;           F:96×48×110   Installation hole 92×44
G:48×48×110  Installation hole 45×45 ;         H:80×160×150  Installation hole 76×156

3:operation display method
'1'potentiometer setting,entire measurement distance display;
'2'push-numerical code switch seeting ,entire measurement distance display.

4:master control method
'0'ON/OFF adjustment;  '1'ON/OFF differential control (dead space enlargement)
'2'2-ON/OFF adjustment;    '3'time proportional ON/OFF adjustment;  '5'Solid state relay adjustment'6mono-phase trigger adjustment ;  '7'mono-phase over zero trigger adjustment
'8'3-phase over zero trigger zdjustment ;    '9'continuous PID standard current signal output

5:an additional alarm
blank or '0':indicates no alarm             '1':upper limit touch alarm  ;       '2':lower limit touch alarm  ; 
'3':upper,lower limit  touch alarm; 

6:input signal classification :
'1'thermocouple; '2'thermresistance;'3'mV signal  ;  '4'resistance signal
'5'standard current signal;   '7'humidity sensor
suffix 'D'30A big power relay