Audited Supplier
FL-JC-600
24-Hour Online After-Sales Service
One Year
Granite, Marble
Machinery & Hardware
220V
Semi-automatic
220V
Touch Screen and PLC
All Typles
4-6n.M
900mm*500mm*1300mm
170kg
FL
Wooden Box
FL-JC-600
China
9031499090
Product Description
1. blades mounted on a clamp to be checked on the index plate, complete saw blade clamp;
2. adjust horizontal position, until the upper grip and underlying block and the position of the saw blade teeth at a relatively reasonable (pads under front distance from the saw blade tooth root is 2mm the most suitable
3. according to the cutter diameter and tooth of the cutter in NC completed the set of relevant parameters in the system, and to adjust the test pressure;
4. started equipment, points degrees disc led saw tablets single tooth points degrees run of while, cylinder piston rod out, drive Xia pressure head down run must trip, carrying with Xia pad block with on each a a knife tooth loaded must size of torque, this torque role Xia as knife tooth no off showed that knife tooth welding qualified, instead is for not qualified into Xia a process for amendment;
5. continued until the fourth step on each tooth of saw blade after detection is complete, the device is in standby state, loosen clamp plate, remove the test finished saw blades, qualified and unqualified goods assortment;
6. repeat the above steps to complete batch saw the test operation.
2. adjust horizontal position, until the upper grip and underlying block and the position of the saw blade teeth at a relatively reasonable (pads under front distance from the saw blade tooth root is 2mm the most suitable
3. according to the cutter diameter and tooth of the cutter in NC completed the set of relevant parameters in the system, and to adjust the test pressure;
4. started equipment, points degrees disc led saw tablets single tooth points degrees run of while, cylinder piston rod out, drive Xia pressure head down run must trip, carrying with Xia pad block with on each a a knife tooth loaded must size of torque, this torque role Xia as knife tooth no off showed that knife tooth welding qualified, instead is for not qualified into Xia a process for amendment;
5. continued until the fourth step on each tooth of saw blade after detection is complete, the device is in standby state, loosen clamp plate, remove the test finished saw blades, qualified and unqualified goods assortment;
6. repeat the above steps to complete batch saw the test operation.
Model | FL-JC-600 |
Voltage | AC220V |
power | 1kw |
Control and os | Touch screen and PLC |
Application range | Φ200mm-Φ600mm |
Size | 900mm*500mm*1300mm |
Segments type | All types |
Moment of force | 4-6N*M |
Air source pressure | 0.8Mpa |
Air source flow | 30L/min |
Air source connector size | Φ8mm |
N.M | 170KG |
Packing Details: Export standard packing: Carton or crate, up to your requirement; Rust proofed before packing - Water proofed - Impact protection
1. Are you a manufacturer or a trading company?
We are a manufacturer.
2. What are your delivery terms?
FOB/CIF/EXW /DDP/DDU.
3. What is the minimum order quantity for this Fully Automatic Mechanical Cold Press Machine for Diamond Segments?
The minimum order quantity is 1 piece.
4. Do you have stock available?
With the exception of custom products, we have almost all products in stock.
