Direct Warping Machine with V Creel for Cotton

Direct warping machine with V creel for cotton
 

1. Axial displacement of warping table is control by accurate servo motor. Start point and section location can be set automatically.

2. Space reed and section are kept in equidistance which is optional .

3. Warping brake is clamp type. Beaming brake is external steel strip damping type, which eliminates the noise and uneven tension problems occured in traditional.

4. It is equipped with microcomputer and PLC, with function of total length count, roll lenth count, section count, broken end memory and stop motion of full total length or warp, etc.

5. Touch screen shows info clearly, easy to operate.

6. Section tension is constant during warping and beaming.

7. Steel cone with angle 1:6.3 is good for kinds of warping.

8. Wax and pressure device are optional for beaming machine.

9. Creel number and pitch are as your requirements

10. Warp stop motion and static eliminator are optional.

  (1) Working width                        2300-5500(as your requirement)  

  (2) Beam flange dia.                    ≤φ1000mm

  (3) Warping speed                       0~600m/min

  (4) Beaming speed                       0~150m/min

  (5) Power                                     3Phase   AC 380V  50HZ

  (6) Drum dia                                1026mm    

  (7) Cone angle                            9°(1:6.3)

  (8) Cone length                           1320mm

  (9) Dynamic balance                    accord with GB9239 balance quality standard 6.3grade

  (10) Drum drive                           11kw/15kw three-phase asynchronous motor

  (11) Speed deviation                   <0.5%

  (12) Speed fluctuate                   ±0.2%

  (13) Main bearing                      SKF

  (14) Warping operation table traversing     ball lead screw fixed, servo drive nut

  (15) Guide rail                                ball linear rail 

  (16) Driving motor                          0.75kw AC servo motor (Delta)

  (17) Section traversing speed       0.001~9.999mm/r

  (18) Section traversing deviation   0.02%

  (19) Section location                     automatic

  (20) Forward and back movement of warping table      servo motor, ball lead screw drive

  (21)Guide rail                               ball linear rail

  (22) Yarn guide roller brake        electro-magnetic brake

  (23) Tension control                    constant

  (24) Safety                                   infrared stop motion

  (25) Main control                          PLC

  (26) Screen                                 10.4 inch Delta colorful touch screen

  (27) Technical parameter            calculations of warping length, roller length, strip, speed, displacement, etc.