Audited Supplier
CLW5180TXS3
Available
12 Months
ISO9000, CCC, EEC
Manual
EU 3
Diesel
11300
Burnishing
Cold Water Cleaning
New
High Pressure Road Sweeper
5000 Liters
7000 Liters
CLW
Nude with Waxing
8700x2500x3350 mm
Hubei
87059099
Product Description
Dust free sweeper truckDry road sweeper: The dry road sweeper adopts a dry dust removal method, which means that the sweeper does not spray water during the dust removal process during cleaning operations. Therefore, a filter must be installed in the garbage bin or air duct of the dry road sweeper. During the cleaning operation of a dry road sweeper, the garbage with a high density that is sucked in from the suction port will naturally settle when entering the garbage bin due to the sharp decrease in wind speed in the bin. However, the small dust with a light density that is sucked in will be intercepted by the filter as it passes through the air flow. According to the different types of filters used by road sweepers, some dry road sweepers can use water spray to compress dust while others cannot use water spray to prevent filter blockage.
| Truck model | CLW5180TXSD3 | ||
| Chassis model | EQ1110SJ8BDC | ||
| Wheelbase | 4700mm | ||
| Front/rear suspension | 1130/2070 mm | ||
| Engine model | Chassis engine | B190-33 | |
| Spare engine | JE493-G3 | ||
| Engine rate | Chassis engine | 140kw, 5900cc, 190hp | |
| Spare engine | 57 kW | ||
| Max upgrade angle | 30% | ||
| Emission standard | Eu 3 | ||
| Accelerating outside noise | ≤84dB(A) | ||
| Max speed | 103 km/h | ||
| Approach angle | 21° | ||
| Departure angle | 13° | ||
| Weight specifications | Kurb weight | 11350 kg | |
| Whole weight | 18000 kg | ||
| Dimension specifications | Whole dimension | 8700×2500×3450mm | |
| Minimum height above ground | 250 mm | ||
| High pressure clean | Clean speed | 3~20 Km/h | |
| Clean width | 3 m | ||
| Water pressure | 12 MPa | ||
| Water pump flow | 115 L/min | ||
| Clean and suction performance | Cleaning efficiency | ≥95% | |
| Maximum suction particle size | 110 mm | ||
| Clean and suction width | 3 m | ||
| Max clean capacity | 60000 m2/h | ||
| Disc brush size | ≥400 mm | ||
| Clean and suction speed | 3-20 km/h | ||
| Water Tank | Water tank volume | 5 m³ | |
| Dust tank | Dust tank volume | 7 m³ | |
| Dump bin tilting angle | ≥46° | ||
| Discharge door opening angle | ≥85° | ||
| Hydraulic system | Model | Open, electrical control | |
| Major parts | Gear pump, hydraulic motor, hydraulic cylinder, solenoid valve | ||
| System pressure | 16 MPa | ||
| Oil tank | 60 L | ||
| Oil temperature | 60 ˚C | ||
| Electrical system | Model | DC24 V | |
| Voltage | 24 V | ||
| Battery | 24 V | ||
| Water spray system | Major parts | Electric diaphragm pumps, water filters, nozzles, etc. | |
| Sweeping devise | Modle | Center two swabs, driven by a hydraulic motor, and the front right can be controlled independently, with a evasive reply function. | |
| Brush diameter | 850 mm | ||
| Brush angle | Tilt forward: 4-6 degrees Tilt: 4-7 degrees | ||
| Sucking plate | Model | Double suction, hydraulic control, spring suspension. | |
| Suction plate diameter | 180 mm | ||
| Suction plate width | 1800mm | ||
| High pressure water system | Model | post pump | |
| No:. | Germany PT36 | ||
| System pressure | 10 MPa | ||
| Speed | 1150 r/min | ||
| Water valve model | Hydraulic pressure ball valve. | ||
| Water valve pressure | 7 MPa | ||
| Spray nozzles model | High pressure washing type | ||
| Water filter | Mesh type | ||
Hi, This is Larry from Chengli Special Automobile Co.,Ltd.
We are manufacturer of all kinds of special trucks and pressure vessel(lpg tanks) since the year 2004. I am also working in this field more than 7 years, feel free to contact me for the quick response by 24 hours telphone number
