
Wire Diagram,
Dorma ES200 control unit provide terminal for light barrier, emergency off pushbutton, programm switch, key switch, code card reader, radars, Hand programmer,etc.

Door Parameter,
| 1-panel sliding door - Clear passage width - Door panel weight, max. | LW 700 - 3000 mm 1x100KG |
| 2-panels sliding door - Clear passage width - Door panel weight, max. | LW 800 - 3000 mm 2x100KG |
Technical Datas,
| Height | 100 and 150 mm |
| Overall depth | 180 mm |
| Opening and closing force | Max.150N |
| Opening speed (incremental setting) | 10 - 50 cm/s |
| Closing speed (incremental setting) | 10 - 40 cm/s |
| Hold-open time | 0.5 - 30 sec. |
| Mains voltage, frequency | 230 V, 50/60 Hz |
| Power consumption | 180 W |
| International protection | IP 20 |
| Tested according to low-voltage directives | yes |
| Manufacture according to ISO 9001:2000 | yes |
Control Unit,
| Microprocessor controller | yes |
| Functional programs - Off - Automatic - Permanent open - Partial opening - Exit only - Night-bank switch | yes yes yes yes yes yes |
| Emergency off | yes |
| Self-learning | yes |
| Automatic reversing | yes |
| Connection for bistable electro-mechanical locking | yes |
| Connection for light barrier(max 2 pairs) | yes |
| Setting of all basic parameters via integrated display and pushbuttons | yes |
| Emergency opening or closing (with use of battery pack) | yes |
| 24 V output for external loads | yes |
| Read-out error memory with error codes | yes |
| DCW bus interface | yes |











Audited Supplier










