Audited Supplier
SP-110/80 680 Double Layer PP/PS Plastic Sheet Extruder for making two layer plasic sheet roll for cups, lunch box thermoforming
I. QUANTITY: ONE SET
II. MAIN PARAMETERS:
Target material | PP/HIPS/GPPS |
Efficient width of sheet | 680mm(adjustable) |
Thickness of sheet | 0.25~2.0mm |
Tolerance of thickness | ±0.01mm |
Size of press roller | Φ350×780mm |
Size of forming roller | Φ350×780mm |
Size of fixed roller | Φ350×780mm |
Maximum output | 250-280kg/hr |
General power | ~110KW |
Measurement of the entire machine | ~12500×1850×2200mm |
III.Configuration and specification:
- No.1 Main Extruder: one
- #200 model Hard-tooth Gearbox: one.
The body of the gearbox is made from cast steel. The teeth deal with grinding and peeling eventually, which provides different characteristics of damping, antifriction, low-noise, long using period etc.
e.Barrel Heaters: The electric heater is made of cast aluminum with fan. Every electric heater has a specially designed tunnel for heat radiating.
f. Main motor power: 37KW, 6-gear, FC; rotary speed: 980r/min
g. AC motor with an inverter control
b. The screw
Material: high quality nitrided steel-38CrMoAlA
Nitration depth: 0.4-0.7mm, hardness≥940HV, fragility is 2 grades.
c. Barrels
Material: high quality nitrided steel-38CrMoAlA
Nitration depth: 0.4-0.7mm, hardness≥940HV, fragility is 2 grades.
d. Heating zones: 4 zones
e.Barrel Heaters: The electric heater is made of cast aluminum with fan. Every electric heater has a specially designed tunnel for heat radiating.
f. Main motor power: 37KW, 6-gear, FC; rotary speed: 980r/min
g. AC motor with an inverter control
h. Screw diameter: 80mm
i. L/D: 23:1
c. Roller length: 780mm
d. Roller surface treatment: plated chrome and half-mirror polishing
2. Trimming unit: one
Slitting knife: 2pcs
3. Haul off unit: one
a. Haul off steel roller: one
Diameter of the roller: 180mm
Length of the roller: 780mm
Surface treatment: plated chrome and half-mirror polishing
b. Haul off rubber roller: one
Diameter of the roller: 180mm
Length of the roller: 780mm
Surface treatment: coated erosion resistance, heat resistance and friction resistance rubber and polished.
c. Motor: One unit (6-gear, 2.2kw, FC)
d. AC motor with an inverter
4. Double Working-Position Winder (One set)
Shaft number: two
3" and 2" winding shaft,
Control by a high-grade torque motor
Macine packed by Wooden case or Plastic film
Our Services
We are appreciated with advance equipment, experience and production power. We provide on time after- sales service. We integrate the design, development, production, sales and after-sales services to our clients.
Machine adjustment and installation
we can send technicians go to customers' country for mahchine adjustment and installation
gaurantee time and after-sale
one year guarantee time, after one year , we have professional after-sales department providing best service if any problems.
