Audited Supplier
XF19-32-915
Whole Life of Machine
12months
Colored Steel
CE
New
Customized
Roof, Wall
Machinery
Blue(Customizable)
PLC System
4+4kw
380V 50Hz 3phases(Customizable)
0-15m/Min
Roof Panel Machinery
13+10 Steps(Customizable)
7t
450h Steel
Cr12
45# Steel with Chrome Treatment
XF
Naked and Covered by Plastic Film Into Container
Customized
Botou China
8455221000
Product Description
Color steel roll forming machine double layer roof sheet Roll forming machine
The main parts: roll forming machine; molding press; cutting machine; PLC computer control;
hydraulic system. The machine is stable, with no noise, no shake.
We can make and design the kinds of roll forming machines according to customer's requests
Main rollers
Rollers manufactured from 45# steel,CNC lathes,Heat Treatment,hard Chrome Coated
1.Roller stations: 15+12row wheels (according to different design, depend on the profile drawing)
2.Shaft diameter: 70mm, solid.
3.Wheel speed: 10-15M/min
The processed rollers are smooth, hard and will not rust.
Will not leave any scratches on the sheet when working.
Rollers manufactured from 45# steel,CNC lathes,Heat Treatment,hard Chrome Coated
1.Roller stations: 15+12row wheels (according to different design, depend on the profile drawing)
2.Shaft diameter: 70mm, solid.
3.Wheel speed: 10-15M/min
The processed rollers are smooth, hard and will not rust.
Will not leave any scratches on the sheet when working.
Computer control cabinet
It adopts TaiDa PLC to control,
Computed mode has two modes: Automatic and manual.
touchscreen
The unit length of the targeted sheet can be set in the control cabinet.
the operation is easy, running is steady and reliable, endurable.
It adopts TaiDa PLC to control,
Computed mode has two modes: Automatic and manual.
touchscreen
The unit length of the targeted sheet can be set in the control cabinet.
the operation is easy, running is steady and reliable, endurable.
hydraulic pump station
The hydraulic system uses the CDF-10 hydraulic pump, long operating life, no noise.
It is controlled by gear wheel oil pump, after filling the hydraulic oil into the hydraulic oil tank,
the pump drive the cutting machine to begin the cutting job.
The hydraulic system uses the CDF-10 hydraulic pump, long operating life, no noise.
It is controlled by gear wheel oil pump, after filling the hydraulic oil into the hydraulic oil tank,
the pump drive the cutting machine to begin the cutting job.
Feeding table
Feeding is smooth and level
The tail is equipped with a hand-pulled knife for early cutting and cost saving
Feeding is smooth and level
The tail is equipped with a hand-pulled knife for early cutting and cost saving
Cutting knife
1.Work type: Hydraulic
2.Driving method: By Cylinder
3.Cutter material : Cr 12/CR12MOV, Heat treatment
4.Cutting length tolerance: ±1.0mm
5.Advantages:Energy saving effect, hydraulic technology can achieve higher energy conversion efficiency and reduce energy consumption, the hydraulic drive response speed is fast.
1.Work type: Hydraulic
2.Driving method: By Cylinder
3.Cutter material : Cr 12/CR12MOV, Heat treatment
4.Cutting length tolerance: ±1.0mm
5.Advantages:Energy saving effect, hydraulic technology can achieve higher energy conversion efficiency and reduce energy consumption, the hydraulic drive response speed is fast.
remote control
The device is equipped with a remote control for easier operation. You can start or pause it anytime and anywhere.
The device is equipped with a remote control for easier operation. You can start or pause it anytime and anywhere.
Botou Xianfa Press Factory has a 28-year production history.
Currently, our products have been exported to Australia, the United States, Romania, Dominican Republic, Mexico, Kenya, Thailand, Philippines, Zimbabwe, Peru, Colombia, Croatia, Saudi Arabia, Macedonia, etc., more than 130 countries and regions around the world.
We maintain a good cooperative relationship with our customers.
We firmly believe that technological innovation and making every detail of the product perfect are our eternal pursuit.
Welcome to visit our factory
PackageOur equipment will be inspected before shipment, and then wrapped in plastic wrap to prevent moisture and protect the surface. We will take anti-collision measures on important parts before packing.
