Audited Supplier
Wintop double portrait horizontal single-axis solar tracker system,a double-row solar panel can generate more electricity at the same time than a single-row solar panel.
The single-axis solar tracker rotates on one axis and moves back and forth in one direction. Different types of single-axis trackers include horizontal, vertical, tilt, and polar alignment, which rotates as the name implies.
| PV-Modules | |
| PV- Modules supported | Fully fit for 210 module |
| Structure | |
| System type | One portrait horizontal single-axis tracker |
| Maximum capacity per row | 54kWp (Estimated with 600W PV-Modules) |
| PV- Module quantity per row | 2PX45,2PX30 |
| Tracking Range | ±60°(Customized according to project) |
| Tracking accuracy | ±1° |
| Motor quantity | 1 motor per row |
| Structural Materials | HDG Steel, Al- Mg-Zn Coating Steel |
| Foundation | Concrete foundation, Steel pile, PHC pile |
| Quantity of foundation/MW | 130 PCS/ MW (Estimated with 600W PV-Modules) |
| Electrical | |
| Solar tracking method | Astronomical algorithm + closed- loop control (AI) |
| Control system | MCU |
| Signal transmission | Wire (RS485) or wireless (Zigbee) |
| Drive method | Slew Drive |
| Motor Type | 24V DC Motor |
| Power supply | AC- powered or self- powered |
| Backtracking | Yes |
| Manual operation | Yes |
| Protection function | |
| Wind protection | ≥18m/s |
| Night stow mode | Yes |
| Overheat prevention | Yes |
| Overheat prevention | Yes |
| System fault self-diagnosis | Yes |
| Rotate to horizontal time | 4-5min |
| Environment | |
| Wind load | Customized according to local condition |
| Operating temperature | -30°C ~ +60°C |
| Operating temperature | C5 |
| Slope tolerance | North-south 10%~20%, East-west no limits |
| Other | |
| Special tools | Not required |
| Load design standard | GB, ASCE, BS EN,AS (according to project) |
Electrical Principle
- Fully fit for 210 module
- Intelligent AI algorithm to improve power generation
- Adaption to various terrains allowing a north-south slope up to 10% to 20%
- Easy installation and easy maintenance
- Stable and reliable operation
- Power generation increasement of 15-30%
Main Structure components
Wintop Multi-drive Solar Tracker Advantages:
- System Damping Ratio is greater
- Reduce Amplitude on Modules by 50%
- Reduce the Force on Torque Tube by 50%
- Reduce the Force on Driving Pillar by 50%
- Reduce Torsion Angle on Torque Tube by 50%
- Optimize Wind Resistance System
- Traditional Single-drive Tracking System
- WTT Multi-drive Tracking System
Operating Mode
Terrain Adaption
- Flexible Layout
- Fully Use Irregular Land, Improve Land Utilization
- 20% N-S Slope
- Unlimited E-W Slope
Foundation Options
Type of Foundation
|
Steel Piles
|
Concrete with Steel Piles
|
Poured Concrete Pile
|
PHC Piles
|
PHC Piles
|
Application
|
Soft Ground
|
Soft Ground
|
Gravel Ground
|
Agriculture PV Complementary
|
Fishery PV Complementary
|
Connection Method
|
Direct Ramming
|
Ramming+Conc rete
|
Anchor Bolt Connection
|
Pile-Top Welding
|
Pile-Top Welding |
Modules Array Proposals
Xiamen Wintop New Energy Tech. Co. Ltd was established in 2016, it is a high-tech enterprise that integrates R&D, production and marketing of Solar Mounting System for residential, commercial and utility scale customers.
(1) Are you a manufacturer, trading company or a third party?
We are a manufacturer, and we have built up our company since 2016.
(2) Where is your factory located?
Our factory address is : No.585, HongTang Road, TongAn District,Xiamen,City,Fujian,P.R.China.
(3) How can I get to your factory?
When you arrive in the Xiamen International Airport,then we can pick you up there,and next visit our head office and factory.
(4) If i will need to stay in your place for few days, is that possible to book the hotel for me?
It's always my pleasure, hotel booking service is available.
(5) What is your minimum order quantity, can you send me samples?
Our minimum quantity is 1 set, and Yes it is acceptable to send you samples if you need,then you just need to pay the shipping fee of the samples.If you need,please feel free to send your inquiry to me.
