Audited Supplier
S, SH
Yes
1 Year
140m
16000m3/H
Motor or Diesel Engine
Single-Stage Pump
Middle Pressure Pump
Double-Suction Pump
Horizontal Pump
Horizontal Split Pumps
Suction Centrifugal
Closed
Pump, Pumps
Blue, Yellow, Green, Red, etc
220V/380V/415V/460V,etc
50Hz/60Hz
Export Standard Wooden Box
Cast Iron, Cast Steel, SS304, SS316, Bronze, etc
Hebei, China
8413709990
Product Description
Double Suction Split Case Centrifugal Pump
The split casing pump is also called a single-stage double-suction centrifugal pump.
The suction port and discharge port of the split casing pump are below the axis of the pump, and the horizontal direction is vertical to the axis. The pump casing is split in the center. There is no need to disassemble the inlet and outlet pipes and the motor during maintenance.
The main parts of the split casing pump are: pump body, pump cover, impeller, shaft, double suction seal ring, shaft sleeve, bearing, etc.
The pump body and the pump cover constitute the impeller's working room. The water inlet and outlet flanges are equipped with pipe screw holes for installing vacuum gauges and pressure gauges, and the lower part of the water inlet and outlet flanges are equipped with pipe screw holes for water discharge.
The impeller has undergone static balance verification and is fixed with a sleeve and sleeve nuts on both sides. Its axial position can be adjusted by the sleeve nut. The axial force of the impeller is balanced by the symmetrical arrangement of its vanes,there may be some residual axial force that the bearing at the coaxial end bears.
The pump shaft is supported by two single-row radial ball bearings. The bearings are installed in the bearing bodies at both ends of the pump body and are lubricated with butter.
Performance Parameters:
Structure:
Application:
Company:
Shijiazhuang Chongmu Fluid Machine Co., Ltd is a modern pump company specializing in production, research and development, sales and service. We have been in the centrifugal pump industry for more than 20 years. We have a modern standard pump room and a processing workshop with a variety of advanced processing equipment. The whole process from casting to assembly is one-stop closed-loop production. The team of experienced production R&D engineers is professional and efficient. Choose us, professional team, professional equipment, trustworthy.
Chongmu Main products:
1.Slurry pumps
2.Gravel pumps
3.ZJQ submersible slurry pumps
4.Inline pumps
5.Multi-stage pumps
6.Split case pumps
7.Sewage pumps
8.Mixed flow pumps
9.Self priming pumps
10.Spare parts
Our Workshop:
FAQ:
1.What information do you need to offer a quotation?
Liquid:
Pump Capacity: m³/h or L/S
Pump Head: M
pH:
Specific of gravity:
Voltage: V
Frequency: Hz
2.Are you the manufacturer or trading company?
We are real manufacturer for centrifugal pumps,and we have been in this industry for more than 20 years.
3.Can we pay a visit to your factory?
Yes.We warmly welcome you to visit our factory.
4.What is the MOQ?
There is no MOQ.
1 set of pump,or 1 piece of spare part is ok.
5.Do you accept OEM orders?
Yes.Send us the drawings,then we can produce for you.
The split casing pump is also called a single-stage double-suction centrifugal pump.
The suction port and discharge port of the split casing pump are below the axis of the pump, and the horizontal direction is vertical to the axis. The pump casing is split in the center. There is no need to disassemble the inlet and outlet pipes and the motor during maintenance.
The main parts of the split casing pump are: pump body, pump cover, impeller, shaft, double suction seal ring, shaft sleeve, bearing, etc.
The pump body and the pump cover constitute the impeller's working room. The water inlet and outlet flanges are equipped with pipe screw holes for installing vacuum gauges and pressure gauges, and the lower part of the water inlet and outlet flanges are equipped with pipe screw holes for water discharge.
The impeller has undergone static balance verification and is fixed with a sleeve and sleeve nuts on both sides. Its axial position can be adjusted by the sleeve nut. The axial force of the impeller is balanced by the symmetrical arrangement of its vanes,there may be some residual axial force that the bearing at the coaxial end bears.
The pump shaft is supported by two single-row radial ball bearings. The bearings are installed in the bearing bodies at both ends of the pump body and are lubricated with butter.
Performance Parameters:
| Flow range: | 50-16000m3/h |
| Head range: | 8-140m |
| Power: | 18.5-2240KW |
| Material: | Cast Iron,Cast Steel,SS304,SS316,Bronze,etc |
Structure:
Application:Company:
Shijiazhuang Chongmu Fluid Machine Co., Ltd is a modern pump company specializing in production, research and development, sales and service. We have been in the centrifugal pump industry for more than 20 years. We have a modern standard pump room and a processing workshop with a variety of advanced processing equipment. The whole process from casting to assembly is one-stop closed-loop production. The team of experienced production R&D engineers is professional and efficient. Choose us, professional team, professional equipment, trustworthy.
Chongmu Main products:
1.Slurry pumps
2.Gravel pumps
3.ZJQ submersible slurry pumps
4.Inline pumps
5.Multi-stage pumps
6.Split case pumps
7.Sewage pumps
8.Mixed flow pumps
9.Self priming pumps
10.Spare parts
Our Workshop:
FAQ:
1.What information do you need to offer a quotation?
Liquid:
Pump Capacity: m³/h or L/S
Pump Head: M
pH:
Specific of gravity:
Voltage: V
Frequency: Hz
2.Are you the manufacturer or trading company?
We are real manufacturer for centrifugal pumps,and we have been in this industry for more than 20 years.
3.Can we pay a visit to your factory?
Yes.We warmly welcome you to visit our factory.
4.What is the MOQ?
There is no MOQ.
1 set of pump,or 1 piece of spare part is ok.
5.Do you accept OEM orders?
Yes.Send us the drawings,then we can produce for you.
