Drilling Machine for Pleated Fabric Mesh Honeycomb Blind Fabric

Machinery and specific equipment for the production of pleated mosquito nets.
The various types of processing can be carried out by machinery of different ranges to allow each company to equip itself with the equipment that best suits its needs as much depends on the quantity of custom-made mosquito nets that must be obtained daily.
The models are continuously developing thanks to the advice and modification requests from our customers. This allows you to have a clear view of any problems that arise during use or the need for changes to adapt to the change of materials or processing to be performed for production.
All equipment can be adapted to the needs of the end user.

In addition to the production of machinery, we are also able to supply customized work stations to facilitate operators in the various stages of assembly and product control.
We are at your complete disposal for further information or clarifications.

 

We brought together everything you need under the roof of Process to start the production of pleated curtains and add this opportunity product to your production portfolio and offer it for sale.We brought together everything you need under the roof of Process to start the production of pleated curtains and add this opportunity product to your production portfolio and offer it for sale.

The workshop tool/bench group, which will enable you to produce pleated curtains easily, quickly and with high quality, is brought together by our company and offered for sale.

The cut-to-size process of the pleated curtain is very simple and practical thanks to the mechanical cutting machine designed by our company. In addition, an extra component such as a compressor

saves you the trouble. Drilling of the cut curtain should be done in the special drilling drill that we offer you. The feature of this drill is its special tip that does not damage the fabric.

thanks to its easy and high quality drilling. Metal eyelets are used in the eyelet machine to prevent the cut and punched fabric from being damaged by the thread and to work correctly.

placed in one motion. It was time to make the thread setup of the fabric in accordance with the pleat working logic. The threading setup of the fabric is on the loom developed by our company,

After a short training, you can do it very easily and in a very short time (Ip system of a curtain is completed in 3.5 minutes). For time saving and quality production

 If you want to manufacture pleated curtains as in fiction, the only thing you need to do is Process Aluminum Plastik Ltd. Sti. is to contact you.

How to clean

1. Remove dirt, etc., and then wash it with a soft cloth or sponge with a moist cloth on both sides.
2. In case of heavy dirt, use loosen neutral detergent in warm water and wipe it with a soft cloth or sponge.
3. Do not use thinner, benzene, alcohol, abrasive powder, acid, or alkaline detergent which may cause discoloration or deterioration.
4. Please do not use brushes, metal brushes, etc., as they may damage the screen and frame and cause scratches.
5. If dust or dirt accumulates on the lower rail, please keep it clean by sucking it with a vacuum cleaner.