Audited Supplier
JX-1500
Fine Grinding Machine
Extruding and Milling
High-Speed Steel
Hydraulic
Metal, Plastic
Roller Crusher
1200-2500kg/H
127kw
Cylinder Culling
Outer Surface Process
100-250MPA
Adjustable Tongs
Sichaun Jiuxun
None Packing
1200*600*450(mm)
China
Product Description
1. Equipment Introduction
The machine has unique structure, big processing capacity and lower power consumption. With high separation rate, the separation is conducted by each component coordinately. This equipment has not onlyimproved the purity of copper, but also reduced the pollution to environment.
2. Main Feature :
The machine has unique structure, big processing capacity and lower power consumption. With high separation rate, the separation is conducted by each component coordinately. This equipment has not onlyimproved the purity of copper, but also reduced the pollution to environment.
2. Main Feature :
- Suitable structure and layout, easy to install.
- Convenient to feed and operate.
- The design of separator and dust collector is handy for movement or transport.
- The rotor of the grinder is alternating, leading to more efficiency, faster discharging, low noise and steadier running.
- Feedback system will do the second crushing to the unfinished material, which guarantees the total separation of metal and non-metal.
- The separation rate of air separator can reach at least 99%.
- Dust collector can prevent the leak of dust. The dust cleaning rate can reach 99.99%.
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
4. Technical Parameter
4. Technical Parameter
| JX-1500 Dry-type Waste Motor Board Recycling Product Line | |
| Modle | JX-1500 |
| Technical Parameters | |
| Application | Crush and separate ferrous metal, non-ferrous metal and plastic of waste motor |
| Overall Dimension(L*W*H) | 1200*600*450(MM) |
| Output | 1200-2500kg/h |
| Total Power | 127kw |
| Weight | 11200kg |
