Audited Supplier
10CBM
Free Service on Internet
One Year
Combined
Parallel Flow
Dielectric
Timber
Air
Continuous
Continuous Vacuum
2100mm / 6.89'
6000mm / 19.67'
6000X1300X1380mm / 19.67'x 4.26' X 4.52'
Brand New
Stainless Steel Inside
50kw
3 Phase, 380V, 50Hz or Customized
Auto Feeding (Included)
Stainless Steel (on The Top)
Stainless Steel
CHANCSMAC
Seaworthy Packing
10 cubic meter capacity
China
8514400090
Product Description
10CBM High-Frequency Vacuum Timber Dryer
1.Introduction
Comparing high-frequency vacuum timber dryer costs and drying ability, the 10CBM model is the most popular type.
There are two main advantages on 10CBM HF vacuum timber dryer:
1). High-frequency internal heating. High frequency is a kind of power also called radio frequency. Its heating theory is the same as the microwave but the wavelength is different. High-frequency power generates an alternating electrical field between two electrodes. The water molecules between electrodes will be polarized by the alternating magnetic field and move in very high speed rapidly. The impact and friction (millions of times per second) among water molecules creates a high temperature in a very short time. So high-frequency power does not heat wood moisture but let wood moisture heated themselves. This continuous effect let the whole body of wood heated wholly and uniformly.
2). High-frequency vacuum timber dryer also adopts vacuum technology. Vacuum condition can reach to -0.092Mpa, and let water vaporized in low temperature below 60 ºC. The wood moisture is easy to dry in low temperature safely and rapidly. That is why the wood will not crack. HF Timber dryer is also equipped with hydraulic system and press to keep timber straight. At the same time, the vacuum can also suck the wood moisture out. The machine cooling system will separate the hot air and hot water out, then cool them and release them out.
Above two main characters caused why high-frequency vacuum dryer can dry wood faster and will not cause a crack and bending problems.
High-frequency vacuum timber dryer do not need any space between wood, saving drying space. Does not need any hot plate, easy and convenient to load wood. It can dry all kinds of wood, such as the floor, veneer, thick wood, beam, expensive rosewood even wood logs. It is the best choice for wood drying.
2.Parameter
There are two main advantages on 10CBM HF vacuum timber dryer:
1). High-frequency internal heating. High frequency is a kind of power also called radio frequency. Its heating theory is the same as the microwave but the wavelength is different. High-frequency power generates an alternating electrical field between two electrodes. The water molecules between electrodes will be polarized by the alternating magnetic field and move in very high speed rapidly. The impact and friction (millions of times per second) among water molecules creates a high temperature in a very short time. So high-frequency power does not heat wood moisture but let wood moisture heated themselves. This continuous effect let the whole body of wood heated wholly and uniformly.
2). High-frequency vacuum timber dryer also adopts vacuum technology. Vacuum condition can reach to -0.092Mpa, and let water vaporized in low temperature below 60 ºC. The wood moisture is easy to dry in low temperature safely and rapidly. That is why the wood will not crack. HF Timber dryer is also equipped with hydraulic system and press to keep timber straight. At the same time, the vacuum can also suck the wood moisture out. The machine cooling system will separate the hot air and hot water out, then cool them and release them out.
Above two main characters caused why high-frequency vacuum dryer can dry wood faster and will not cause a crack and bending problems.
High-frequency vacuum timber dryer do not need any space between wood, saving drying space. Does not need any hot plate, easy and convenient to load wood. It can dry all kinds of wood, such as the floor, veneer, thick wood, beam, expensive rosewood even wood logs. It is the best choice for wood drying.
2.Parameter
| Мodel | HFVD-3-CH | HFVD-6-CH | HFVD-10-CH | HFVD-14-CH | HFVD-20-CH |
| HF Power | 20KW------------80KW | ||||
| Capacity | 3 CBM | 6 CBM | 10 CBM | 14 CBM | 20 CBM |
| Wood loading size LxWxH | 3x1x1m | 6x1x1m | 6x1.3x1.3m | 8x1.3x1.38m | 8x1.6x1.6m |
| Wood-feeding type | Auto | Auto | Auto | Auto | Auto |
| Vacuum pressure | -0.092MPa | ||||
| Weight | 4.5T | 6T | 8T | 11T | 15T |
| Dimension | 4x4x2.7m | 7x4x2.7m | 7x4.5x2.8m | 9x4.5x2.8m | 9x5.5x3.3m |
3.Shipping:
4.FAQ
List some questions customers care about, if you have more quotations, please feel free to contact us
1. Q: What's the MOQ?
R: One set will be ok.
2. Q: Provide customized machine Yes or NO?
R: Yes. We have professional designers and engineers to supply customized machines.
3. Q: What is payment terms?
R: 30%T/T in advance, the balance paid before shipment after inspection.
4. Q: What is the warranty time?
R: One year.
