Audited Supplier
RSGV
Water
Low Temperature
Dual-through
Cast Iron
Flange
Low Pressure
Stem Cap /Hand Whee/Electric Actuator/Post Indica
Wedge Gate Valve
Inside Gate Valve
Regulation, Drain, Flow Control
DIN3352/BS5163 AWWA C509/515
Industrial Usage, Water Industrial Usage, Household Usage
GB/T12232, BS5163, EN1171 / EN1074
BS EN12266-1, API598
Shell:PN*1.5, Seal:PN*1.1
DIN3202-F4/F5, BS EN558-1, ASME B16.1
BS EN 1092-2 ASME B16.1
Cap Nut/Hand Wheel/Electric Actuator
Ductile Iron
Ductile Iron
Ductile Iron
Ductile Iron
DI+EPDM
Brass
AISI 420/Brass
Brass
Ductile Iron
WALTER/ OEM
Wooden Case
DN50-600
Suzhou
8481801090
Product Description
Metal Seated Rising Stem Gate Valve
MRGV Series F4/F5/BS5163
MRGV Series F4/F5/BS5163
WALTER MRGV Metal Seated Rising Stem Gate Valves are primarily designed for flow isolation of a length ofpipeline or piece of equipment. and for use in water, waste water, and sewage as well as heating & marineapplications lt uses a ductile iron gate that houses brass or bronze rings makes it possible to be used bi-directionalland provide a watertight seal, and the metal valve seat is resistant to high temperatures in the medium and willnot deform during long periods of compression, this ensures stable and reliable operation over the long life spanof the valve.
Features:
-Body & Cover are made of high grade Ductile lron.
-With Full Bore design, ensures minimized pressure loss and increased energy efficiency
-Precisely machined brass/bronze seats on the wedge assures tight closure
-Maintenance-free and corrosion-resistant multi stem O-rings ensures higher durability
-Bidirectional use. Possible to install on horizontal and vertical pipelines with varied flow directions.
-Both inside & outside are coated with epoxy resin powder. FBE powder epoxy coating is optional
-Hydro-static test pressure for seat: PN x 1.1 , for shell: PN x 1.5 according to EN 12266-1.
Features:
-Body & Cover are made of high grade Ductile lron.
-With Full Bore design, ensures minimized pressure loss and increased energy efficiency
-Precisely machined brass/bronze seats on the wedge assures tight closure
-Maintenance-free and corrosion-resistant multi stem O-rings ensures higher durability
-Bidirectional use. Possible to install on horizontal and vertical pipelines with varied flow directions.
-Both inside & outside are coated with epoxy resin powder. FBE powder epoxy coating is optional
-Hydro-static test pressure for seat: PN x 1.1 , for shell: PN x 1.5 according to EN 12266-1.
| No. | Parts Name | Material |
| 1 | Body | Ductile Iron |
| 2 | Wedge | Ductile Iron |
| 3 | Seat of Body | Brass/Bronze/S.S |
| 4 | Seat of Wedge | Brass/Bronze/S.S |
| 5 | Bonnet | Ductile iron |
| 6 | Packing | NBR |
| 7 | Packing Gland | Ductile iron |
| 8 | Yoke | Ductile iron |
| 9 | Stem | SS420 |
| 10 | Stem Nut | Brass |
| 11 | Handwheel | Ductile iron |
Suzhou Walter is a professional china-based manufacturer of water system valves and always committed to providing customers with quality products and services.
The company has been established for more than 30 years, and has served more than 50 countries and regions around the world,the professional level High quality service worthy of your trust!
