Automatically turn on 10% output from dusk to dawn. Once the sensor detects a person, it will output 100% until the person leaves and returns to 10% output.
Charging Indicator Light
1. Solid Green LED = Battery full Charged
2. Flashing Green or Yellow or Red = Battery charging
3. Battery Level Display:
Green LED = High Volt ( >11.5V ),
Yellow LED = Medium Volt (11.5-10.5V),
Red LED = Low Volt (<10.5V).
Please Note:The indicator will flash when charging, and when fully charged, it will display green.
·On/Off Switch - Will turn the Batten Light On and Off Manually. When using the PIR Module, it must always be on.
Adjust the PIR Sensor Delay Timer
![]() | The left instructions indicate how to adjust the amount of time the light will stay on when the PIR sensor is triggered. The timer can be adjusted from 10-300 seconds. The default timer setting is 10 seconds. The light will constantly operate while the sensor is being triggered. Steps:
2.Use a Phillips head screwdriver to turn the delay adjustment knob clockwise to the desired time. |










1. Are you a factory or a trading company?
A: We are a manufacturer. Welcome OEM and ODM for you.
2. Can we have a sample order?
A: Of course! Any sample order is welcome for testing and checking.
3.What is the warranty for the products?
A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years
4. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 2-3weeks.
5.How to ship the goods?
A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)
6.How to deal with the faulty?
A: Firstly,Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly,
during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution including re-call according to real situation.