Audited Supplier
9-03
Carbon Steel/Stainless Steel
for Manufacture, Factory
Centrifugal
High Pressure
ISO, CE
Dust Collector Centrifugal Fan
Carbon Steel/Alloy Steel/Stainless Steel
High-Strength Carbon Structural Steel
380V/415V/440V/660V/6kv/10kv
Single Item
Field Installation, Commissioning and Training
100.000kg
Optional
Oemodmobm
Ball Bearng
Free Standing
1year
SIMO BLOWER
Export Wooden Case Packing
100X100X100cm
Henan, China
4107960701
Product Description
Dust Collector Centrifugal Fan
The 9-10.19 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials.
The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating fluidized bed system, air purification and industrial waste gas treatment, flue gas desulfurization industrial boilers or incinerators forced draft/ induced draft/ primary/ secondary air, ventilation of large mill system, industrial waste heat recovery device, blasting of smelting furnace and casting furnace, combustion of blast furnace, coal injection of blast furnace, pressurized transportation of gas, Pressurization or decompression sealing of industrial equipment.
The 9-08/9-10 series fan is a series of fans that are used in a large number of industrial fields.
| Model | Type | Rotation speed (r/min) | Total Pressure (Pa) | Air Flow (m3/h) | Motor Power | Design condition | |||
| 9-08 | 4A | 2900 | 3852~3407 | 2198~3215 | 5.5 | pj=101325Pa tj=20ºC ρj=1.2kg/m3 | |||
| 9-08 | 4.5A | 2900 | 4910~4776 | 3130~3685 | 7.5 | ||||
| 4661~4256 | 3963~4792 | 11 | |||||||
| 9-08 | 5A | 2900 | 6035~5381 | 4293~6349 | 15 | ||||
| 6035~5180 | 4293~6762 | 18.5 | |||||||
| 9-08 | 5.6A | 2900 | 7610~7400 | 6032~7185 | 22 | ||||
| 7218~6527 | 7766~9500 | 30 | |||||||
| 9-08 | 6.3A | 2900 | 9698~8915 | 8588~11883 | 45 | ||||
| 8636~8310 | 12699~13525 | 55 | |||||||
2. In the case of using the common base , the installation is very simple and basically does not require the support of professional technicians.
3. The bearing box is reserved with the temperature and vibration sensor installation position, which can conveniently install the fan operation monitoring device.
4. When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt.
5. Customized design according to customer performance requirements, and optimized by CFD technology, the energy consumption is lower than similar models.
6. The parts are closely matched and have good sealing performance to ensure the output pressure will not be reduced.
7. The impeller is calibrated by high standards for dynamic balance to ensure stable operation of the fan.
8. Running test and vibration value detection after the production is completed, the fan operation is reliable.
9. There are a variety of part options to choose from.
Contact us for more information !
