Audited Supplier
ADS-Kit1
Filling Material
Non-Disposable
Pasted
Dental Department
Specialized Instrument Equipment
CE
A1,A2,A3,A3.5,B1
4G/ Syringe*5
5ml/ Bottle*1
5PCS/ Box*1
20PCS/Box*1
1 Year
10 Kits
2.5ml/Syringe*1
188.4G
0.02-1 Um
135 MPa
2.2%
77% -83% Wt
Good
Good
DENTEX
Box Packing
China
3006400000
Product Description
DX. Universal Nano Hybrid Composite Resin Kit For Teeth Filling
Indication for use
Advantages
1. Solution of simplicity with universal shade
Indication for use
• All class of direct restoration for anterior and posterior.
• Indirect restoration such as veneer, inlay and onlay.
• Core buildups
Advantages
1. Solution of simplicity with universal shade
The shade of DX.Universal composite matches with VITA CLASSIC shade guide. Therefore
mono shade restoration can be applied as conventional & ordinary solution.
2. Nano hybrid technology
DX. Universal composite is applying unique nano hybrid dispersion technology to maximize
the load of fillers by controlling the size and distribution of particles. It dramatically increased
composite's physical properties and notably improved the smooth surface of restoration in
comparison with traditional micro hybrid or hybrid composite
Physical Property Comparison
3. Other advantages
• High radiopaque.
• Fluoride releasing to prevent recurrent caries.
• Excellent handling.
Physical Property Comparison
| DX. Universal nano hybrid | Hybrid/ micro hybrid | |
| Filler Size | 0.02-1 um | 0.4-5 um |
| Flexural Strength | 135 Mpa | 80-1 10 Mpa |
| Shrinkage | 2.2% | 2.5-3.5% |
| Filler Load | 77% -83% Wt | 60-70% Wt |
| Polishing Feature | Good | Not Good |
| Wear Resistance | Good | Not Good |
Package:
REFILL:
Light Cure Composite: 4g/Syringe*5
Total Etching Adhesive: 5ml/Bottle*1
Etching Gel: 2.5ml/Syringe*1
Syringe Needles : 5pcs/ box*1
Applicators Brushes: 20pcs/box*1
Net weight:188.4g
COLOR: A1,A2,A3,A3.5,B1
More Show
Description of Dental Light Cure Composite Kit:
(1)Preparation: isolate and prepare tooth.
(2)Cleaning: rinse the preparation with water.
(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.
(4)Applying Dentex Self-Etching Light Cure Adhesive (DSA): dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).
(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.
(6)Applying Dentex light cure composite (DLC): place selected DLC into
cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.
(7) Finishing: after light cure, adjust restoration.
(8) Polishing: use polishing strip or disc to polish the surface
REFILL:
Light Cure Composite: 4g/Syringe*5
Total Etching Adhesive: 5ml/Bottle*1
Etching Gel: 2.5ml/Syringe*1
Syringe Needles : 5pcs/ box*1
Applicators Brushes: 20pcs/box*1
Net weight:188.4g
COLOR: A1,A2,A3,A3.5,B1
More Show
Description of Dental Light Cure Composite Kit:
(1)Preparation: isolate and prepare tooth.
(2)Cleaning: rinse the preparation with water.
(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.
(4)Applying Dentex Self-Etching Light Cure Adhesive (DSA): dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).
(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.
(6)Applying Dentex light cure composite (DLC): place selected DLC into
cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.
(7) Finishing: after light cure, adjust restoration.
(8) Polishing: use polishing strip or disc to polish the surface
