Audited Supplier
DDM-4A
Dental Clinic
ISO, CE
Dental Health Materials
Steel
Water-Cooled Desktop
Pneumatically-Powered Automatic Tool Changing
Pneumatically-Powered Button, No Tools Is Required
0.5mm 1.0mm 2.0mm
3 Burs
1, 000-60, 000 Rpm
220V, 50/60Hz
50kg
20~40°c
DYNAMIC
Standard Exporting Package
370mmx470mmx410mm
China
8474209000
Product Description
Dynamic dental milling machine focus on chairside CADCAM;
product model:Dynamic DDM-4A
product introduction:DYNAMIC dental milling machine is mainly used for chairside cadcam, the flexible efficient compact machine has a highly accurate dental milling system employed a couple of brand new designs to make it simple and easy to use. It is really a useful aid for digital chairside restoration, and dental laboratory processing.
product parameters
Product features
Applications:
This product is mainly used for digital chairside CADCAM solutions. Can also be used for Posterior crown, Veneers, Inlays / Onlay, Anterior crown, Ultra-thin veneer, Screw retained implant crown (Optional accessories).
After-sales
(FAQ)
1. Does the equipment need an air compressor?
The minimum requirement of air pressure is 0.45Mpa.
2. What is the thinnest cutting thickness?
Composite materials can be ground down to 0.3mm ultra-thin veneer.
3. What type of bur?
Three models in one box, .5mm, 1.0mm, 2.0mm.
4. What is the longest cutting unit length?
3-4 Unit Temporary Crown.
5. What are the data transmission methods?
Wired, wireless, U disk three kinds of transmission.
- Feldspar-type ceramics; lithium based ceramics; Hybrid materials ; PMMA
- It takes15-30 minutes to complete a single restoration
- Posterior crown,Veneers,Inlays / Onlay,Anterior crown, Ultra-thin veneer,Screw retained implant crown(Optional accessories)
product model:Dynamic DDM-4A
product introduction:DYNAMIC dental milling machine is mainly used for chairside cadcam, the flexible efficient compact machine has a highly accurate dental milling system employed a couple of brand new designs to make it simple and easy to use. It is really a useful aid for digital chairside restoration, and dental laboratory processing.
product parameters
| DDM-4A | Parameter |
| Size (L x W x H) | 370mmx470mmx410mm |
| Type | Water-cooled desktop |
| Tool changing model | Pneumatically-powered automatic tool changing |
| Block changing model | Pneumatically-powered button, no tools is required |
| Diameter of the bur head | 0.5mm 1.0mm 2.0mm |
| Burs in magazine | 3 burs |
| Spindle speed | 1,000-60,000 RPM |
| Voltage | 220V, 50/60HZ |
| weight | 50Kg |
| Operation temperature range | 20~40°C |
Product features
- Compactness
- High Precision and Efficiency
- Precise Screw Hole
- Patented Pneumatically-Powered Block Changing
- Mill Two Restorations from a Single Ceramic Block
- Open System
- Simple Operation and Easy to Maintain
- Automatic Tool Changing and Tool Monitoring
- Equiped with minimal 0.5mm bur
Applications:
This product is mainly used for digital chairside CADCAM solutions. Can also be used for Posterior crown, Veneers, Inlays / Onlay, Anterior crown, Ultra-thin veneer, Screw retained implant crown (Optional accessories).
After-sales
(FAQ)
1. Does the equipment need an air compressor?
The minimum requirement of air pressure is 0.45Mpa.
2. What is the thinnest cutting thickness?
Composite materials can be ground down to 0.3mm ultra-thin veneer.
3. What type of bur?
Three models in one box, .5mm, 1.0mm, 2.0mm.
4. What is the longest cutting unit length?
3-4 Unit Temporary Crown.
5. What are the data transmission methods?
Wired, wireless, U disk three kinds of transmission.
