Audited Supplier
S2VC
Insulators, Electrical Wire Insulation
Black, Clear, Yellow, Red, Green, Blue, Purple
Rubber
600 V
350 ºC
2:1 3:1
600V
Halogen Free
Protection
See-Through Clear
Strain Relief
Insulation Sleeve & Tube
Organic Insulation
Organic Insulating Material
ISO9001
Upm Heat Shrink
UPM
Neutral Packaging
Dalian China
39173200
Product Description
S2VC Very Clear Thin Wall Crosslinked Polyolefin Shrink Tubing
| S2VC Very Clear Thin Wall Crosslinked Polyolefin Shrink Tubing | ||||
| Features | ||||
| Insulation, Protection,Identification | Operating temperature: -55~105 ºC | |||
| Voltage Class:600-1000 V | Shrink temperature: 105 ºC | |||
| Halogen free, Flexible | Shrink Ratio:2:1 & 3:1 | |||
| Technical Data | ||||
| Property | Test Method | Values | ||
| Physical | Density | -- | 0.95 | |
| Thermal endurance | -- | 125ºC | ||
| Tensile strength | When test at 500mm/min. | ≥25 MPa | ||
| Breakdown elongation | When test at 500mm/min. | ≥ 450% | ||
| Aging(158 ºC/168hrs) | Tensile strength | When test at 500mm/min. | ≥ 20 MPa | |
| Breakdown elongation | When test at 500mm/min. | ≥ 350% | ||
| Water absorption 24hrs at 23ºC | -- | ≤0.5% | ||
| Heat shock | 4hrs. at 250ºC | No cracking, drop or flow | ||
| Cold bend | 4hrs at -55ºC | No cracking | ||
| Halogen free | IEC 61249-2-21 | Cl : 900ppm max. Br : 900ppm max. Total (Cl + Br) : 1500ppm max. | ||
| Electrical | Dielectric breakdown voltage | -- | ≥ AC 2500V | |
| Dielectric voltage Withstand | 1min.AC2500V | No breakdown | ||
| Aging(158 ºC/168hrs) | Dielectric breakdown voltage | -- | AC 2500V min. and more than 50% of the value obtained with unaged sample | |
| Dielectric voltage Withstand | 1min.AC2500V | No breakdown | ||
| Volume resistivity | -- | ≥1014 Ω.cm | ||
| Chemical | Copper stability | 168hrs at 158ºC 500mm/min. | Elongation≥100% | |
| Flammability | -- | Not flame retardant | ||
| Note: The test methods conform to UL224. | ||||
| Shrink ratio 3:1 | ||||
| Reference | As supplied(mm) | After recovered(mm) | Standard length | |
| UPM S2VC | ID min. | ID max. | WT nom. | m/spool |
| 1.5/0.5 | 1.5 | 0.5 | 0.5 | 200 |
| 3.0/1.0 | 3.0 | 1.0 | 0.7 | 200 |
| 4.5/1.5 | 4.5 | 1.5 | 0.7 | 100 |
| 6/2 | 6.0 | 2.0 | 0.8 | 100 |
| 9/3 | 9.0 | 3.0 | 1.0 | 50 |
| 12/4 | 12.0 | 4.0 | 1.1 | 50 |
| 15/5 | 15.0 | 5.0 | 1.2 | 50 |
| 18/6 | 18.0 | 6.0 | 1.3 | 50 |
| 24/8 | 24.0 | 8.0 | 1.5 | 25 |
| 30/10 | 30.0 | 10.0 | 1.7 | 25 |
| 39/13 | 39.0 | 13.0 | 1.9 | 25 |
| 50/16 | 50.0 | 16.0 | 2.5 | 25 |
| 60/20 | 60.0 | 20.0 | 2.6 | 25 |
| 70/23 | 70.0 | 23.0 | 2.6 | 25 |
| 80/26 | 80.0 | 26.0 | 2.8 | 25 |
| 90/30 | 90.0 | 30.0 | 2.8 | 25 |
| 100/33 | 100.0 | 33.0 | 3.0 | 25 |
| Dimensions | |||||||||
| Shrink ratio 2:1 | |||||||||
| Reference | As supplied ID (mm) | After recovered(mm) | Standard length | Reference | As supplied ID(mm) | After recovered(mm) | Standard length | ||
| UPM S2VC | ID max. | WT | m/spool | UPM S2VC | ID max. | WT | m/spool | ||
| 0.6 | 0.9±0.2 | 0.40 | 0.33±0.10 | 200 | 15.0 | 15.5±0.4 | 7.50 | 0.70±0.10 | 100 |
| 0.8 | 1.1±0.2 | 0.50 | 0.33±0.10 | 200 | 16.0 | 16.5±0.4 | 8.00 | 0.70±0.10 | 100 |
| 1.0 | 1.5±0.2 | 0.65 | 0.36±0.10 | 200 | 17.0 | 17.5±0.4 | 8.50 | 0.70±0.10 | 100 |
| 1.5 | 2.0±0.2 | 0.85 | 0.45±0.10 | 200 | 18.0 | 19.0±0.5 | 9.00 | 0.70±0.10 | 100 |
| 2.0 | 2.5±0.2 | 1.00 | 0.45±0.10 | 200 | 20.0 | 22.0±0.5 | 10.00 | 0.80±0.15 | 100 |
| 2.5 | 3.0±0.2 | 1.30 | 0.45±0.10 | 200 | 22.0 | 24.0±0.5 | 11.00 | 0.80±0.15 | 100 |
| 3.0 | 3.5±0.2 | 1.50 | 0.45±0.10 | 200 | 25.0 | 26.0±0.5 | 12.50 | 0.90±0.15 | 50 |
| 3.5 | 4.0±0.2 | 1.80 | 0.45±0.10 | 200 | 28.0 | 29.0±0.5 | 14.00 | 0.90±0.15 | 50 |
| 4.0 | 4.5±0.2 | 2.00 | 0.45±0.10 | 200 | 30.0 | 31.5±1.0 | 15.00 | 1.00±0.15 | 50 |
| 4.5 | 5.0±0.2 | 2.30 | 0.45±0.10 | 100 | 35.0 | 36.5±1.0 | 17.50 | 1.00±0.15 | 50 |
| 5.0 | 5.5±0.2 | 2.50 | 0.56±0.10 | 100 | 40.0 | 41.5±1.0 | 20.00 | 1.00±0.15 | 50 |
| 5.5 | 6.0±0.2 | 2.75 | 0.56±0.10 | 100 | 45.0 | ≥45 | 22.50 | 1.10±0.15 | 25 |
| 6.0 | 6.5±0.2 | 3.00 | 0.56±0.10 | 100 | 50.0 | ≥50 | 25.00 | 1.10±0.15 | 25 |
| 7.0 | 7.5±0.3 | 3.50 | 0.56±0.10 | 100 | 60.0 | ≥60 | 31.00 | 1.20±0.20 | 25 |
| 8.0 | 8.5±0.3 | 4.00 | 0.56±0.10 | 100 | 70.0 | ≥70 | 36.00 | 1.20±0.20 | 25 |
| 9.0 | 9.5±0.3 | 4.50 | 0.56±0.10 | 100 | 80.0 | ≥80 | 41.00 | 1.30±0.20 | 25 |
| 10.0 | 10.5±0.3 | 5.00 | 0.56±0.10 | 100 | 90.0 | ≥90 | 46.00 | 1.30±0.20 | 25 |
| 11.0 | 11.5±0.3 | 5.50 | 0.56±0.10 | 100 | 100.0 | ≥100 | 51.00 | 1.30±0.20 | 25 |
| 12.0 | 12.5±0.3 | 6.00 | 0.56±0.10 | 100 | 120.0 | ≥120 | 61.00 | 1.30±0.20 | 25 |
| 13.0 | 13.5±0.3 | 6.50 | 0.70±0.10 | 100 | 150.0 | ≥150 | 76.00 | 1.30±0.20 | 25 |
| 14.0 | 14.5±0.3 | 7.00 | 0.70±0.10 | 100 | 180.0 | ≥180 | 91.00 | 1.30±0.20 | 25 |
| ID=Internal Diameter | WT= Wall Thickness | ||||||||
| Typical application | |||||||||
| Ideal for electrical insulation,strain relief,wire bonding and light harness jacketing | |||||||||
| Common applications include electronic systems of subway, aircraft, submarine | |||||||||
| , control room facilities and sealed environment | |||||||||
| Ordering | |||||||||
| Standard color : Clear | |||||||||
