Audited Supplier
edge01
1
1
1
Instant Adhesive
Solid-State
Woodworking
EVA+Resin+Calcium Carbonate
Hot Melt
EVA+Resin+Calcium Carbonate
90-120degree
No
EVA+Resin+Calcium Carbonate
Beige
Cool and Dry Conditions
200ºC About 78000cps
Construction, Woodworking
for PVC, ABS and Other Edge Banding Materi
AM
25kg/Bag
Made in China
3506919090
Product Description
| Shanghai Angmi New Material Technology Co.,ltd | ||||
| Technical Data Sheet | ||||
| Item No.: 6166 (High Temperature Hot Melt glue) | ||||
Items: | Cream/beige color,Non-toxic and environmental friendly.Main components are ethylene andvinyl acetate, added with tackifying resin, accelerator'promoter, stuffing etc. | |||
Technical Data: | viscosity number: 200ºC | Density: 1.20g/cm3 | ||
| softening point: 100-105ºC | heat-resistant Point>60ºC | |||
Operation Data: | Material humidity≥15ºC Ambient temperature ≥15ºC | Moisture Content: 8%- 10% | Pot/Tank Temperate :170- 180ºC | |
| Rubber Roller Temperate:180- 210ºC | Pressure:3-5kg/cm3 | Speed>15meters/min | ||
Application : | Applicable for large full-automatic Linear edge banding machine ;Suitable for PVC,ABS and other edge banding materials; | |||
Characters: | 1.Suitable for majority of large automatic edge banding machines ; | 2.High thermal resistance,high strength, resistance to low temperature ; | ||
| 3.Good liquidity,looks good and very little waste; | ||||
| HOW TO USE AND NOTES:: | ||||
| 1. Have knowledge of different kinds of hot-melt glue and their technical Characters( including technical data). | ||||
| 2.Temperate of Hot melt adhesive pot should be controled in the range of using temperate. | ||||
| 3.Should have periodic cleaning for Preheating glue pot to keep cleaness of the pot. | ||||
| 4.Boards and edging materials should be avoid of being polluted. | ||||
| 5.Moisture content of the boards should be around 8%- 10%. | ||||
| 6.Putting proper quantity of glue into the glue pot/pan , if putting too much, could make the glue deteriorate , and with less viscosity . | ||||
