Audited Supplier
Base Data
| Artical NO. | CL-KSDB |
| Material | polyester fiber (PET) and polyolefin monofilament (PE) |
| Operating Temperature | -40ºC-125ºC |
| Flammability | UL 94 HB |
| Recommended shrink temperature | 160ºC-220ºC |
| Colour | Orange |
| Shrink Ratio | 4:1 |
| Specification | •TL52668-A Type A/GMW 14327 Type A • ROHS2.0,REACH,ELV |
| With inner glue (Yes/No) | No |
| Product Code | Size(mm) | ||
| Folding diameter as supplied(M) | Inside diameter as supplied(D) | Inside diameter after full recovery(d) | |
| CL-KSDB-Φ6.0/3.0-B | 12±2 | >=6.0 | ≤3.0 |
| CL-KSDB-Φ8.0/4.0-B | 16±2 | >=8.0 | ≤4.0 |
| CL-KSDB-Φ10.0/5.0-B | 20±2 | >=10 | ≤5.0 |
| CL-KSDB-Φ12.0/6.0-B | 24±3 | >=12 | ≤6.0 |
| CL-KSDB-Φ16.0/8.0-B | 29±3 | >=16 | ≤8.0 |
| CL-KSDB-Φ20.0/10.0-B | 36±3 | >=20 | ≤10.0 |
| CL-KSDB-Φ25.0/12.5-B | 44±3 | >=25 | ≤12.5 |
| CL-KSDB-Φ30.0/15.0-B | 53±4 | >=30 | ≤15.0 |
| CL-KSDB-Φ35.0/17.5-B | 60±4 | >=35 | ≤17.5 |
| CL-KSDB-Φ40.0/20.0-B | 68±4 | >=40 | ≤20.0 |
| CL-KSDB-Φ45.0/22.5-B | 78±4 | >=45 | ≤22.5 |
| CL-KSDB-Φ50.0/25.0-B | 85±5 | >=50 | ≤25.0 |
| CL-KSDB-Φ60.0/30.0-B | 100±5 | >=60 | ≤30.0 |
| CL-KSDB-Φ70.0/35.0-B | 116±5 | >=70 | ≤35.0 |
| CL-KSDB-Φ80.0/40.0-B | 132±5 | >=80 | ≤40.0 |
| CL-KSDB-Φ90.0/45.0-B | 145±5 | >=90 | ≤45.0 |
| CL-KSDB-Φ100.0/50.0-B | 162±5 | >=100 | ≤50.0 |
Accept customization
Application: The orange heat shrinkable woven sleevs is customised for new energy sources and offers excellent abrasion resistance, noise reduction and finishing.
Q: Are you a factory or a trading company?
A: Our factory is located in Changzhou City, near Shanghai. Welcome to visit our company.
Q: Can I get samples?
A: If we have the samples you need in our stock, we can supply them, but postage could be paid by you. If you have cooperated with us, we can send samples free of charge.
If the samples you need is not in stock, we can also make it according to the drawings and requirements you provide. We will charge some sample preparation fee or mould fee. Our existing moulds are quite complete though.
Q: How about the payment?
A: T/T, L/C, ALI pay are accepted. Our customers usually pay 50% deposit in advance, then the balance pay before shipping.
Payment terms ae negotiable.
Q: What about the delivery time?
A: Conventional specification products will be returned on delivey date according to the quantity of orders.
Special specification products will be returned on delivery date according to the manufacturing time of the mould.
About 10-45 days after receiving deposit.
