Audited Supplier
CL-HFT
Automotive Harnessing, Communication industry, Machine Protection, Wire & Cable Protection, Electronics,Automobile,Wind Power,Machinery
Orange&Customized Color
Flexible
1.5mm-80mm,Accept Customization
PE
300V/600V
-
-55ºC-125ºC
-
-40ºC-125ºC
≥90ºC
≥125ºC
•UL224/ASTM D2671
RoHS,Reach,Elv
Changli
Carton
Customizable
Changzhou
3917390000
Product Description
Base Data| Item | CL-HFT | |
| Continuus Temperature Range | -40ºC-125ºC | |
| Specifications | •UL224/ASTM D2671 •EN45545 R22/23 HL3 •ROHS2.0,REACH,ELV,POPs,PAHs | |
| Radial Shrinking Ratio | 2:1,3:1,4:1 | |
| Recommended shrink temp. | 80ºC-120ºC | |
| Tensile Strength | ≥10.4MPa | |
| Elongation Ratio | ≥200% | |
| Volume Resistivity (Ω·cm) | IEC 60093 ≥1013 | |
| Dielectric Voltage Withstand | 600V | |
| Cold Bend | No cracking | |
| Heat Shock | No drops, no flowing and no cracking. | |
| Dielectric Strength(kv/mm) | ≥15k | |
| Features | •Irradiation crosslinked polyolefin material •Soft, Elastic & Environmental | |
| Size | As supplied(mm) | After full recovery | ||
| Inside diameter | Wall-thickness as supplied | Inside diameter (d) | Wall-thickness | |
| Φ1.5 | 2.00±0.30 | 0.20±0.05 | ≤0.80 | 0.40±0.08 |
| Φ2.0 | 2.50±0.30 | 0.20±0.05 | ≤1.00 | 0.42±0.08 |
| Φ2.5 | 3.00±0.30 | 0.22±0.05 | ≤1.25 | 0.42±0.08 |
| Φ3.0 | 3.50±0.30 | 0.25±0.06 | ≤1.50 | 0.46±0.10 |
| Φ3.5 | 4.00±0.30 | 0.25±0.06 | ≤1.75 | 0.46±0.10 |
| Φ4.0 | 4.50±0.30 | 0.25±0.06 | ≤2.00 | 0.48±0.10 |
| Φ4.5 | 5.00±0.30 | 0.25±0.06 | ≤2.25 | 0.48±0.10 |
| Φ5.0 | 5.50±0.40 | 0.25±0.06 | ≤2.50 | 0.48±0.10 |
| Φ6.0 | 6.50±0.40 | 0.25±0.06 | ≤3.00 | 0.50±0.10 |
| Φ6.5 | 7.00±0.40 | 0.30±0.08 | ≤3.25 | 0.58±0.10 |
| Φ7.0 | 7.50±0.40 | 0.30±0.08 | ≤3.50 | 0.58±0.10 |
| Φ8.0 | 8.50±0.50 | 0.36±0.09 | ≤4.00 | 0.70±0.10 |
| Φ9.0 | 9.50±0.50 | 0.36±0.09 | ≤4.50 | 0.72±0.10 |
| Φ10 | 10.50±0.50 | 0.36±0.09 | ≤5.00 | 0.72±0.12 |
| Φ11 | 11.50±0.50 | 0.36±0.09 | ≤5.50 | 0.72±0.12 |
| Φ12 | 12.50±0.50 | 0.36±0.09 | ≤6.00 | 0.72±0.12 |
| Φ13 | 13.50±0.50 | 0.36±0.09 | ≤6.50 | 0.72±0.12 |
| Φ14 | 14.50±0.50 | 0.36±0.09 | ≤7.00 | 0.72±0.12 |
| Φ15 | 15.50±0.50 | 0.36±0.09 | ≤7.50 | 0.72±0.12 |
| Φ16 | 16.50±0.50 | 0.36±0.09 | ≤8.00 | 0.72±0.12 |
| Φ17 | 17.50±0.50 | 0.36±0.09 | ≤8.50 | 0.72±0.12 |
| Φ18 | 18.70±0.60 | 0.40±0.12 | ≤9.00 | 0.78±0.15 |
| Φ20 | 20.70±0.60 | 0.40±0.12 | ≤10.0 | 0.80±0.15 |
| Φ22 | 22.70±0.70 | 0.46±0.15 | ≤11.0 | 0.86±0.15 |
| Φ25 | 25.70±0.70 | 0.46±0.15 | ≤12.5 | 0.90±0.15 |
| Φ28 | 29.00±0.70 | 0.46±0.15 | ≤14.0 | 0.94±0.20 |
| Φ30 | 31.00±1.00 | 0.46±0.15 | ≤15.0 | 1.00±0.20 |
| Φ35 | 36.00±1.00 | 0.50±0.15 | ≤17.5 | 1.00±0.20 |
| Φ40 | 41.50±1.50 | 0.50±0.15 | ≤20.0 | 1.05±0.25 |
| Φ45 | 46.50±1.50 | 0.50±0.15 | ≤22.5 | 1.05±0.25 |
| Φ50 | 52.00±2.00 | 0.55±0.18 | ≤25.0 | 1.15±0.25 |
| Φ55 | 57.00±2.00 | 0.55±0.18 | ≤28.0 | 1.15±0.25 |
| Φ60 | 62.00±2.00 | 0.58±0.18 | ≤30.0 | 1.20±0.25 |
| Φ70 | 72.00±2.00 | 0.58±0.18 | ≤35.0 | 1.20±0.25 |
| Φ80 | 82.00±2.00 | 0.60±0.18 | ≤40.0 | 1.20±0.25 |
(Orders for products with special specifications are acceptable).
Application: Environmentally friendly continuous identification sleeve, widely used in electronics, communications, automobiles, rail transit, construction, public facilities and other fields
Q: Are you a factory or a trading company?
A: Our factory is located in Changzhou City, near Shanghai. Welcome to visit our company.
Q: Can I get samples?
A: If we have the samples you need in our stock, we can supply them, but postage could be paid by you. If you have cooperated with us, we can send samples free of charge.
If the samples you need is not in stock, we can also make it according to the drawings and requirements you provide. We will charge some sample preparation fee or mould fee. Our existing moulds are quite complete though.
Q: How about the payment?
A: T/T, L/C, ALI pay are accepted. Our customers usually pay 50% deposit in advance, then the balance pay before shipping.
Payment terms ae negotiable.
Q: What about the delivery time?
A: Conventional specification products will be returned on delivey date according to the quantity of orders.
Special specification products will be returned on delivery date according to the manufacturing time of the mould.
About 10-45 days after receiving deposit.
