Audited Supplier
CLK6130E
24 Hours
1 Year
Metal
Metal-Cutting CNC Machine Tools
Contour Control
Semi-Closed Loop Control
CNC/MNC
0.01~0.02(mm)
Economical CNC Machine Tools
GS, CE, ISO 9001
New
Bar Feeder
Allway
Wooden Case
CLK6130E
China
84581100
Product Description
CLK6130E adopts horizontal lathe layout, can automatically processing shaft type and all kinds of small , medium-sized plate workpiece. Like inside and outside the cylinder surface, circular arc surface, end face, cutting groove,chamfering, thread machining, was widely used in machinery, electronics, instruments and meters, oil pump, nozzle, light industry, medical and other industries, was more suitable for vocational and technical education, has high efficiency and practicality.
Horizontal flat bed structure, integral pedestal , main components like lathe bed,pedestal adopts high strength material resin sand casting, full aging treatment, guideway by the high frequency quenching treatment, to ensure the stability.
Variable frequency speed spindle, high precision, high speed angular contact bearings are adopted for front and rear of support bearings of spindle system. high speed, high precision, strong rigidity, small thermal deformation, smooth running, low noise characteristics significantly.
longitudinal and cross movement shaft adopts servo motor drive, precision ball screw transmission, half closed loop control system with pulse encoder position detection feedback, fast response, high precision, long service life. Contact Angle 60 °thrust angular contact bearings is adopted specially for lead screws for screw bearing , can withstand the high axial load, to ensure the rigidity and precision of the feeding transmission device.
2) manual 3 jaw chuck 165mm;
3) Cross slide with T-slot;
4) 4 position electric tool post,16*16mm cutter bar
5) manual tailstock;
6) Manual lubrication
7) Work light
8) Leveling bolts
9)GSK-980TD CNC controller
4.Optional configuration:
1) FANUC,Siemens,Mitsubishi,HNC,GT66T,KND
2) Pneumatic or hydraulic collet chuck
3)hydraulic chuck;
4)6 position electric tool post;
5)Automatic intermittent lubrication
Horizontal flat bed structure, integral pedestal , main components like lathe bed,pedestal adopts high strength material resin sand casting, full aging treatment, guideway by the high frequency quenching treatment, to ensure the stability.
Variable frequency speed spindle, high precision, high speed angular contact bearings are adopted for front and rear of support bearings of spindle system. high speed, high precision, strong rigidity, small thermal deformation, smooth running, low noise characteristics significantly.
longitudinal and cross movement shaft adopts servo motor drive, precision ball screw transmission, half closed loop control system with pulse encoder position detection feedback, fast response, high precision, long service life. Contact Angle 60 °thrust angular contact bearings is adopted specially for lead screws for screw bearing , can withstand the high axial load, to ensure the rigidity and precision of the feeding transmission device.
| Specification | Unit | Model CLK6130E | ||
| Max.swing over bed | mm | 300 | ||
| Max.swing over cross slide | mm | 100 | ||
| Max. processing Dia.(don't pass slide/pass slide) | mm | 300/100 | ||
| Max. distance between end surface of standard chuck (doesn't contain claws) to enter of tailstock(standard live center) -----(support length) | mm | 430 | ||
| Max outside Dia.of through bar allowed cross inner of spindle(standard configuration) | mm | 36 | ||
| X.Z axis travel | mm | X:165 Z:350 | ||
| X,Z rapid feeding | mm/min | X:4500/Z:6000 | ||
| Screw specification | mm | X:20*4/Z:25*6 | ||
| spindle | Spindle nose taper | NO. | Morse5 | |
| Code for spindle nose | A2-5 | |||
| Spindle speed range | r/min | 100-3000 | ||
| Chuck(standard configuration) | mm | 160(manual) | ||
| Tool turret | Section size for tools | mm | 16 | |
| Tool numbers | 4 /option:6 horizontal) | |||
| type | vertical | |||
| Tailstock | Tailstock move type | mm | manual | |
| Tailstock spindle taper | NO. | MT3 | ||
| Tailstock sleeve travel | mm | 100 | ||
| cooling | cool pump | w | 90 | |
| Rate of flow | l/min | 25 | ||
| volume | L | 30 | ||
| Lubrication type | standard | manual | ||
| Power form | AC voltage | V | 3 380±10% | |
| Frequency | HZ | 50±10% | ||
| Total Power capacity | Kw | 7 | ||
| Positioning accuracy of x,z axis | mm | X:0.02/:0.025 | ||
| Re-positioning accuracy of x,z axis | mm | X:0.012/:0.016 | ||
| Main motor power | Kw | 2.2 | ||
| N.W | mm | 1000 | ||
| Overall dimension(L*W*H) | Kg | 1530*1200*1600 | ||
3.Standard configuration:
1) spindle speed 200-3000 rpm; Conversion frequency spindle motor 2.2KW2) manual 3 jaw chuck 165mm;
3) Cross slide with T-slot;
4) 4 position electric tool post,16*16mm cutter bar
5) manual tailstock;
6) Manual lubrication
7) Work light
8) Leveling bolts
9)GSK-980TD CNC controller
4.Optional configuration:
1) FANUC,Siemens,Mitsubishi,HNC,GT66T,KND
2) Pneumatic or hydraulic collet chuck
3)hydraulic chuck;
4)6 position electric tool post;
5)Automatic intermittent lubrication
