Audited Supplier
Ecpc Assembled Tank Biogas Digester
New
ISO
Automatic
Single-Screw
Biological Treatment
Anaerobic Fermentation
Mingshuo
Standard Export Packing
Customized
China
73090000
Product Description
Ecpc Assembled Biogas Anaerobic Fermentation Tank for Waste Treatment
Anaerobic digestion (AD) is a well-established process for renewable energy production in which biomass is broken down and converted to biogas (a mixture of methane, carbon dioxide and traces of other gases) by micro-organisms. The environment inside a biodigester is complex, depending on the composition of the feedstock and operating conditions, and some of the by-products are corrosive to certain structural materials. It is essential to minimise maintenance because each time the AD process is interrupted, it takes 3-4 weeks for production to start up again.
The ECPC tank is assembled by special steel plates, dedicated sealing materials, self-locking bolts, etc. It is widely used in biogas projects, sewage disposal projects, chemical industry, power engineering and other fields of dry type gas storage tanks, anaerobic tanks, aerobic pools, sewage disposal devices, granaries, cement storage tanks, workshops, garages, oil storage tanks, feed tanks, raw materials tank for brewing.
There are paint film protective layers on the surface of the special steel plate after treatment. It's hardness, adhesion, corrosion and shock resistance can be adjusted according to the clients' requirements. It can maintain the pressure of 5kPa, and can also be combined with the integrated double membrane biogas holder to make fermentation gas production and storage integration device.
Note: For each assembled tank, it's customized design to accommodate the client's wishes and external factors.
Typical Size of 1000m^3 Assembled Tank: φ 11.46m * H 9.6m
Physical properties of ECPC layer materials for assembled tanks
Coating color: Standard color is dark green, can be customized.
Coating thickness: 0.25~0.45mm, two-sided coating.
Ph: The standard coating is suitable for: 3~11.
Adhesion: 3,450 N/cm
Elasticity: The same as the coated steel plate, about 500kN/mm
Hardness: 6.0 (with MO-hardness tester)
Service life: ≥ 30
Advantages:
1. High corrosion resistance, long use time
2. High strength self-locking bolts which have glue cap, good effect of water-seal and anti-corrosion
3. Thermostability sealant, anti bio-corrosion
Project Display: 3300 m^3 Assembled Tanks in Malaysia
Producing, Packing & Installation
Management System Certification: ISO9001:2008, ISO14001:2004, OHSAS18001:2007
Company Introduction:
Shandong Mingshuo New Energy Technology Co., Ltd. Specializes in biogas project. The company is the production base of medium and large biogas equipments in China, the member of China Biogas Association, the member of China Association of Rural Energy Industry. The company is the recommended member of CCTV Website Enterprise Channel and China Import and Export Commodity Website, the most complete and excellent biogas equipments manufacturers in China. Mingshuo is a professional company integrating the scientific research, technological design, production and debugging service. The company specializes in the production of desulfurizer, desulfurization equipments and biogas equipments. Such as, Mingshuo MTZ biogas dedicated desulfurizer, MT ferric oxide desulfurizer, 889 wet desulfurization catalysts, water treatment agent, MS biogas dedicated desulfurization tanks, thioniers, biogas dedicated gas-water separators, assembled tanks, gas holders, positive-negative pressure protectors, biogas dedicated flame arresters, biogas boilers, deironing magnetic separation equipments, etc.
Anaerobic digestion (AD) is a well-established process for renewable energy production in which biomass is broken down and converted to biogas (a mixture of methane, carbon dioxide and traces of other gases) by micro-organisms. The environment inside a biodigester is complex, depending on the composition of the feedstock and operating conditions, and some of the by-products are corrosive to certain structural materials. It is essential to minimise maintenance because each time the AD process is interrupted, it takes 3-4 weeks for production to start up again.
The ECPC tank is assembled by special steel plates, dedicated sealing materials, self-locking bolts, etc. It is widely used in biogas projects, sewage disposal projects, chemical industry, power engineering and other fields of dry type gas storage tanks, anaerobic tanks, aerobic pools, sewage disposal devices, granaries, cement storage tanks, workshops, garages, oil storage tanks, feed tanks, raw materials tank for brewing.
There are paint film protective layers on the surface of the special steel plate after treatment. It's hardness, adhesion, corrosion and shock resistance can be adjusted according to the clients' requirements. It can maintain the pressure of 5kPa, and can also be combined with the integrated double membrane biogas holder to make fermentation gas production and storage integration device.
Note: For each assembled tank, it's customized design to accommodate the client's wishes and external factors.
Typical Size of 1000m^3 Assembled Tank: φ 11.46m * H 9.6m
Physical properties of ECPC layer materials for assembled tanks
Coating color: Standard color is dark green, can be customized.
Coating thickness: 0.25~0.45mm, two-sided coating.
Ph: The standard coating is suitable for: 3~11.
Adhesion: 3,450 N/cm
Elasticity: The same as the coated steel plate, about 500kN/mm
Hardness: 6.0 (with MO-hardness tester)
Service life: ≥ 30
Advantages:
1. High corrosion resistance, long use time
2. High strength self-locking bolts which have glue cap, good effect of water-seal and anti-corrosion
3. Thermostability sealant, anti bio-corrosion
Project Display: 3300 m^3 Assembled Tanks in Malaysia
Producing, Packing & Installation
Management System Certification: ISO9001:2008, ISO14001:2004, OHSAS18001:2007
Company Introduction:
Shandong Mingshuo New Energy Technology Co., Ltd. Specializes in biogas project. The company is the production base of medium and large biogas equipments in China, the member of China Biogas Association, the member of China Association of Rural Energy Industry. The company is the recommended member of CCTV Website Enterprise Channel and China Import and Export Commodity Website, the most complete and excellent biogas equipments manufacturers in China. Mingshuo is a professional company integrating the scientific research, technological design, production and debugging service. The company specializes in the production of desulfurizer, desulfurization equipments and biogas equipments. Such as, Mingshuo MTZ biogas dedicated desulfurizer, MT ferric oxide desulfurizer, 889 wet desulfurization catalysts, water treatment agent, MS biogas dedicated desulfurization tanks, thioniers, biogas dedicated gas-water separators, assembled tanks, gas holders, positive-negative pressure protectors, biogas dedicated flame arresters, biogas boilers, deironing magnetic separation equipments, etc.
