Audited Supplier
AT1600
Light
Dual
LED Constant Current
Electronic Step-down Transformer
CE, RoHS
Constant Current Source
Booster Type
1.5-36V
SMD
Sunshineopto
sunshineopto
Carton
48W
China
8504109000
Product Description
Reliable Efficient DC24V Boost Constant Current LED Driver (AT1600)
Suitable for DC10V-28V Input voltage
Output power Boosting type
Short circuit protection
Power factor is > 0.9,low temperature
ROHS standard
Have bared PCB and Plastic box for choice
Specification
Picture of boost led constant driver :
Bared Boost LED Driver PCB Board :
Features :
Constant Current
Input voltage DC12V-24V
Rated ouptut power 48W
Boost output
Output voltage LED should be higher than input voltage
For outdoor & Indoor lights
Output open circuit short circuit protection
IP65 Waterproof
Main Datas :Suitable for DC10V-28V Input voltage
Output power Boosting type
Short circuit protection
Power factor is > 0.9,low temperature
ROHS standard
Have bared PCB and Plastic box for choice
Specification
| Model NO. | AT1600-12-12XP2W | AT1600-24-24XP2W |
| Rated Input voltage | DC10-28V | DC20-28V |
| Input voltage scale | 10~28V DC ,50~70Hz | |
| Efficiency | >90% | >90% |
| Rated input power | <29W | <56W |
| Loading input power | <0.2W | <0.2W |
| Short-circuit input power | <0.3W | <0.3W |
| DC Current | <2450 mA | <2400 mA |
| Cold start surge current | <25A | <25A |
| Leakage current | NO | NO |
| Constant current output scale | 650±30mA,(Vin+3)-40V | 650±30mA,(Vin+6)-77V |
| Loading voltage | <3V | <3V |
| Ripple ,noise | 0.5V | 0.5V |
| Linear adjust | 1% | 1% |
| Load regulation | 1% | 1% |
| Time for starting | <0.5S | <0.5S |
| Opposite for wires | Damaged | |
| Low or high input voltage | Long Low voltage or high voltage will damage the power supply | |
| Short-circuit or open-circuit output | protection | |
| Overheat | IC has protection for overheat | |
| Working temp & humidity | -20ºC-60ºC,20-95%RH | |
| Storing temp ,humidity | -25ºC-80ºC,20-95%RH | |
| RoHS | YES | |
| MTBF | >25000 HOURS | |
| Dimension ,weight | PCB78mm*39mm*24mm;80g plastic case 101mm*46mm*29mm;110g | |
| Input wires: | stranded cable black /PVC 0.50mm2/length 100mm; L,N,Yellow-green ground wire | |
| Output wires | stranded cables white/0.50mm2/length 100mm Black LED - ; RED /LED + Ground wire | |
Picture of boost led constant driver :
Bared Boost LED Driver PCB Board :
Competitive Advantage:
1. One Stop Of LED Solutions, About 14 years specializing in High Power LED industry;
2. Complete supplying system with full range of Products, from high power leds, led optical lens ,led constant drivers, MCPCB modules and many led light components;
3. Strict process and quality control;
4. Strong design of OEM Service and production capability.
Applications:
General Illumination
- Outdoor & Indoor architectural lighting
- Decorative lighting
- Flood lighting,cast light lamps
- Street lamp,Tunnel lamp
- Replace the old equipment .
