Audited Supplier
EGMO5A
Full-Duplex & Half-Duplex
Ethernet Switch
100Mbps
≦8
5year
Switch - 5 Ports - Unmanaged
-40~+85°c;5%~95% Rh Non Condensing
-40 to 85°c
Egmele
Original Box
26XD: 70XH: 95 mm
China
Product Description
Introduction
The EGMO5A series are highly integrated and reliable industrial Ethernet switches. They are equipped with up to 5 10/100BaseT(X) ports and 4 100base-FX fiber ports. All RJ45 ports support auto-negotiation, 10/100Mbps speed, full and half duplex, MDI/MDIX.While all fiber ports support 100Mbps speed, full duplex, single/multi-mode, ST/ SC connectors, and dual fiber connectors. They offer redundant power supply input ,with the range of 12~36VDC or 10~24VAC. They can be installed with either din-rail or panel.
Features
Technology
IEEE Standard:
Processing Type: store-and-forward
MAC Address :2K
Packet Buffer: 1518 byte
Flow Control: Full Duplex Flow Control, Half Duplex Back Pressure Control
Protocol: CSMA/CD(Carrier Sense Multiple Access/Collision Direct)
Interface
RJ45 ports :Auto-negotiation 10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX,
The transmission distance of Cat5 Shielding or non-shielding wire is not more than 100m.
Fiber Ports: 100Base-FX, ST/SC connectors
The transmission distance is optional.
Power Input Connection: Standard four terminal dual power input
LED Indicators
Optical Interface
Power Inputs
Environmental Limits
Physical Characteristics
Level of Protection: IP30
Installation: DIN-rail or panel mounting
Certification
CE FCC:
Ordering Information
The EGMO5A series are highly integrated and reliable industrial Ethernet switches. They are equipped with up to 5 10/100BaseT(X) ports and 4 100base-FX fiber ports. All RJ45 ports support auto-negotiation, 10/100Mbps speed, full and half duplex, MDI/MDIX.While all fiber ports support 100Mbps speed, full duplex, single/multi-mode, ST/ SC connectors, and dual fiber connectors. They offer redundant power supply input ,with the range of 12~36VDC or 10~24VAC. They can be installed with either din-rail or panel.
Features
- Up to 5 10/100BaseT(X) ports and 4 100base-FX fiber ports
- Redundant power supply input
- Input voltage:12-36VDC or 10-24VAC
- Din-rail or panel mounting
Technology
IEEE Standard:
| 802.3 10Base-T Ethernet |
| 802.3x Flow Control and Back Pressure |
| 802.3u 100Base-TX and 100Base-FX Fast Ethernet |
MAC Address :2K
Packet Buffer: 1518 byte
Flow Control: Full Duplex Flow Control, Half Duplex Back Pressure Control
Protocol: CSMA/CD(Carrier Sense Multiple Access/Collision Direct)
Interface
RJ45 ports :Auto-negotiation 10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX,
The transmission distance of Cat5 Shielding or non-shielding wire is not more than 100m.
Fiber Ports: 100Base-FX, ST/SC connectors
The transmission distance is optional.
Power Input Connection: Standard four terminal dual power input
LED Indicators
| P1/P2 | S | S | L | L | LX | LX |
| Green on | Green on | Green off | Green on | Green flashing | Green on | Green flashing |
| Power On | Link rate 100Mbps | Link rate 10Mbps | Link established | Data transmitted | Link established (optical port) | Data transmitted (optical port) |
Optical Interface
| Mode | Transmission Distance | Centre Wavelength | Cable Size | TX Power(dBm) | RX Power(dBm) | Transmission Rate |
| Multi-mode | 2km | 1310nm | 62.5/125um | -20~-10dBm | < -32dBm | 100Mbps |
| Single Mode | 20km | 1310nm | 9/125um | -15~-8dBm | < -32dBm | 100Mbps |
| Input | Voltage | Power | Frequency |
| DC | 12-36V | Max.12.5 | N/A |
| AC | 10-24V | Max.12.5 | 47~63Hz |
| Operation Temperature | Storage Ambient Temperature | Humidity | Model (-W) |
| -10ºC~+60ºC | -40ºC~+85ºC | 5~95% | Industrial Standard Temperature Switch |
| -40ºC~+85ºC | -40ºC~+85ºC | 5~95% | Industrial Wide Temperature Switch |
Level of Protection: IP30
Installation: DIN-rail or panel mounting
Certification
CE FCC:
| Standard | Test Method | Descriptions | Testing Level |
| EN55024 | EN61000-4-2 | Electrostatic Discharge Test | 6KV Contact Discharge 8KV Air Discharge |
| EN55024 | EN61000-4-3 RI | Radiated Susceptibility | 10V/m, 80MHz-1000MHz |
| EN55024 | EN61000-4-4 FTB | Electrical Fast Transient /Burst Immunity Test | Power DM:2KV CM:2KV; Signal DM:1KV CM:1KV |
| EN55024 | EN61000-4-5 VS | Surge Immunity Test | Power, Signal DM:1KV; Power, Signal CM:2KV |
| EN55024 | EN61000-4-6 CI | Conducted Susceptibility Test | 10V rms 0.15MHz to 80MHz |
| EN55024 | EN61000-4-11 Voltage Dips /Interruptions | Voltage Interruptions and Voltage Dips Emission Immunity Test | 1 Line Cycle@1005% Dip 1-5seconds@>100% Dip |
| EN55022 | CISPR 22 Radiated | Radiated Emission Test | Class A |
| EN55022 | CISPR 22 Conducted | Conducted Emission Test | Class A |
| CFR47, P15 | ANSI C63.4 | Radiated Emission Test | Class A |
Ordering Information
| EGMO5A-24VDC | Din-rail Unmanaged Switches, 5 10/100BaseT(X) ports, -10ºC to 60ºC operating temperature, 12-36VDC or 10-24VAC Power Input |
| EGMO5A-24VDC-W | Din-rail Unmanaged Switches, 5 10/100BaseT(X) ports, -40ºC to 85ºC operating temperature, 12-36VDC or 10-24VAC Power Input |
| EGMO5A-2SC-24VDC | Din-rail Unmanaged Switches,3 10/100BaseT(X) ports and 2 100BaseFX ports with SC connectors, multi-mode, 2km, -10ºC to 60ºC operating temperature, 12-36VDC or 10-24VAC Power Input |
| EGMO5A-2SC-24VDC-W | Din-rail Unmanaged Switches, 3 10/100BaseT(X) ports and 2 100BaseFX ports with SC connectors, multi-mode, 2km, -40ºC to 85ºC operating temperature, 12-36VDC or 10-24VAC Power Input |
| EGMO5A-2SSC-24VDC | Din-rail Unmanaged Switches, 3 10/100BaseT(X) ports and 2 100BaseFX ports with SC connectors, single-mode, 20km, -10ºC to 60ºC operating temperature, 12-36VDC or 10-24VAC Power Input |
| EGMO5A-2SSC-24VDC-W | Din-rail Unmanaged Switches, 3 10/100BaseT(X) ports and 2 100BaseFX ports with SC connectors, single-mode, 20km, -40ºC to 85ºC operating temperature, 12-36VDC or 10-24VAC Power Input |
| Note: |
