Audited Supplier
OD3.0
ISO9001, CE
Tubular
Fe-Cr-Al Wire
Tubular
Tubular
German Nickel Chrome Wire
Japan Imported
Yes
Yes
450 Degree
Stainless Steel 304
12 Months
J & K
Customized
300mm
no
Carton Box, Wooden Case
3mm, 6.35, 8, 12.7
China
851690100
Product Description
Electric Heating Element Cartridge Heaters OD3.0mm 3D Printer
1. Cartridge Heater Working Principle
Electric cartridge heater, also known as single-end tubular heater, one end can heat, another end is cold end.
It is made of a metal tube put into the resistance alloy wire as the heating materials, the alloy wire is filled with good insulation high purity magnesium oxide as filler, the product has a big power, high thermal efficiency, fast heat dissipation characteristics.
2. Performance Rating:
Maximum Temperature: ≤ 300 °C
Maximum Watt Density: heat area sufuce power 5~11W/cm² depending on heater size and operating temperature.
Votage: 12~250V (or as requirment)
3. Characteristics:
- Alloy 304 stainless steel is used to provide high temperature strength, good thermal conductivity and resistance to oxidation up to 1200°F(650°C). Alloy 304 is a Nickel-Chromium Stainless Steel.
- German Imported Nickel-Chrome resistance wire NiCr8020 is evenly stretched and strung through ceramic insulators.
- USA imported high purity Magnesium Oxide (MgO) is used to fill all remaining space inside the ceramic insulator, thus increasing thermal conductivity, dielectric strength and heater life.
- The standard termination, consisting of 30cm internally / externally connected flexible stranded nickel wire leads with high temperature insulation. To meet your different application, we offer other style leadwires, that will solve many of the most common application problems.
- Ceramic end cap protects the cartridge internally from outside contamination.
4. Parameter
| Heat intensity | Not exceeding 30Wcm2 (advisable) |
| Power | Depends on the dimension |
| Escape of current (when cold) | <=0.1mA a 242 v. |
| Insulation (when cold) | 5 Min Ohmios 500 Watts minimum |
| Dielectric strength | 1500v. 1/seg |
| Working temperature | 750ºG max. |
| Tolerance of length | +/-1.5% |
| Tolerance of diameter | -0.01 a -0.06 m/m |
| Tolerance of cut of connexion | +/-15 mlm |
| Power tolerance (w) | 5 % - 10 % |
| Cold areas | Depends on length and diameter 5-25mm |
| Thermocouple Location | type J |
| type K |
5. Cartridge Heater Structure
6. Cartridge Heater Leadwires:
1>.Silicone rubber
2>. PFA
3>. Metal hose
4>. Metal screen Braided
7. Fast Heat
8. Cartridge Heater Application
Injection moulding - Internal heating of nozzles
Hot runner systems - Heating of manifolds
Packaging industry - Heating of cutting bars
Packaging industry - Heating of hot stamps
Laboratories - Heating of analytical equipment
Medical: Dialysis, Sterilization, Blood Analyzer, Nebulizer, Blood/Fluid Warmer, Temperature Therapy
Telecommunications: Deicing, Enclosure Heater
Transportation: Oil/Block Heater, Aircraft Coffee Pot Heaters,
Food Service: Steamers, Dish Washers,
Industrial: Packaging Equipment, Hole Punches, Hot Stamp.
9. Different Cartridge Heaters
10. How to order?
Please offer these information:
| 1.Type of Cartridge Heater (shape, striaght or right angle) |
| 2.Diameter of Tube |
| 3.Overall length for Cartridge Heaters. |
| 4.Wattage & Voltage |
| 5.Lead type ( glass fibre / PTFE ) & lead length. |
| 6.The lead wire length. |
