Audited Supplier
XA65/20
80-110m
>400 L/min
Motor
Single-Stage Pump
Middle Pressure Pump
Single Suction Pump
Horizontal Pump
Horizontal Split Pumps
Suction Centrifugal
Closed
Pump, Pumps, Circulating Pump, Industrial Pump
Yes
Mechanical Seal/Packing Seal
50/60Hz
1450/2900rpm
ATACH
Plywood Casing
XA
China
8413709990
Product Description
- Name of pump: Electric Horizontal Water Pump 3 Phase 4 Pole 1450RPM
- Pump Type: Centrifugal Pump
- Pump model: XA65/20
- Pump brand: ATACH
-Installation Type: Horizontal Coupling
- Impeller Quantity: 1 pcs
- Rated pump capacity: 55 m3/h
- Rated pump head: 14 m
- Power/speed: 5.5 HP/1450 r.p.m
- Power supply: 3 phase/380V/50HZ
(also supply special voltage,special frequency, explosion-proof motor, High efficiency and energy saving motor )
- Material Supply: Cast Iron,SUS304 impeller Available
- Shaft Seal: Mechanical seal /packing seal
- Inlet / outlet : 80mm*65mm /125mm*80mm
- NPSH: 2 m
Overview:
XA-type pumps are used to suction and deliver clear water and liquid with physical and chemical properties similar to water's, and are applicable to factories, mines, water supply and drainage in cities, air conditioning. fire fighting and farmland irrigation and drainage. Pumps of the same specification will have different performances due to change of impeller O.D. (add A, B, c and other letters after the pump model)
This kinds of pumps have simple structure, reliable performance, small volume, light weight, good anti-cavitation performance, low power electricity and convenience in use and maintenance.
XA-type pumps have wide versatility and have 60 kinds of models in total in the whole series, which only usel 4 kinds of shafts. Shafts, bearing, shaft sleeve, shaft seal, impeller fasteners, ete. of pumps of the same specil fication can be exchanged with each other; only 5 kinds of suspensions for the whole series of pumps.
When close-coupled connection is required, change to use the XAZ type. The pump's rev. can be divided into two levels: 2900r/min and 1450r/min or 1480r/min.
Performance: 2900r/min 1450r/min or 1480r/min
Maximum flow: 132L/s 300L/s
Maximum total life: 155mm 58m
Max. rev.: 3500r/min (the impeller diameter will be reduced to some extent when used for the 60-cycle power)
Max. working temperature: 105ºC
Shaft seal: packing seal or mechanical seal
Min. working temperature:-10ºC
If you need other specifications or parameters of XA series suction water Pump, please contact us in detail.
