Audited Supplier
Generator Auto Synchronization control panel
Synchronization is an efficient power distribution unit to combine multiple gensets as one complete power source providing electricity for various loads. It can distribute loads reasonably, easy for expanding local power network and simplify electrical lines arrangement.
Multiple gensets are usually used in one factory. Old traditional way for power distribution is done by man, which will cause unreasonable loads distribution on branch lines. Some genset's load is too big and others are too small, not good for rational utilization of resources.
Advantages:
★ Reasonable loads sharing ensure gensets run under most economical conditions.
★ High sustainability for impact load and load shocking.
★ Excellent stabilization on output voltage and frequency.
★ No break between multiple gensets transfer.
★ Minimize cable consumption.
★ Extremely convenient for local power network capacity expanding.
Our characteristics:
★ Our synchronization panel synchronizes multiple gensets to work in parallel.
★ Synchronization process is fully automatic. After synchronization, various loads are automatically shared and controlled by set ratio, increasing or ★ ★ decreasing output, adding new genset or stoping online genset.
★ Surprising flexibility for free combination. Every synchronization panel can be freely combined with any corresponding capacity genset. One panel ★ with one genset, no matter what engine you use, no matter what alternator you have.
★ Equipped with Deepsea DSE7510 controller. Ensuring you complete and reliable protections against various gensets defaults, reverse power, over current, over load.
★ Comprehensive meter displaying for Power output, three phases current and voltage, frequency.
Light and sound alarm for set faults.
★ Emergency stop button beside control panel.
★ Easy operation and convenient maintenance.
★ Reasonable price and quick deliver.
★ Enclosure cabinet are painted by electrostatic polyester powder paint. Protection class Ip23.
PLN Rote 2×3MW power plant Auto Synchronization control panel
PLN is the Indonesian National Grid Corporation, responsible for the construction of power stations and power grids in Indonesia. SHME, as a long-term partner of PLN, provides PLN with high and low voltage distribution switchgear and DCS control systems for multiple power stations.
PLN Sanggau 2×7.5MW power plant DCS control system
PLN is the Indonesian National Grid Corporation, responsible for the construction of power stations and power grids in Indonesia. SHME, as a long-term partner of PLN, provides PLN with high and low voltage distribution switchgear and DCS control systems for multiple power stations.Use SELCO T4500 Synchronization controler
Indonesia palm oil manufacture power plant Auto Synchronization control panel
