Audited Supplier
All Size according to clients requirement
Insulated
Stranded
Overhead, Heating, Underground
Copper
PVC
XLPE
Round Wire
Flame Retardant
ISO9001, CE, CCC
Jantle Marine
Light
Customized
24V, 220V, 280V, 10 Kv
Jantle Marine
Marine Standard
All Sizes
China
8544492100
Product Description
Used for medium and heavy mechanical loads, in dry and wet areas, also outdoor. Could be installed under or on plaster, in rocks, concrete, but not in pre-stressed concrete.
Cable suitable for fixed industrial and home installation, for operating conditions with possible fire or explosion hazard, for mobile energy users, machine tools and agricultural machines, for construction sites at medium mechanical loads, for large kettles, heating plates, hand lamps, electrical tools such as drills, circular saws and electrical tools for household use, same as for mobile engines or machines on construction sites and craftsman i.e. agricultural plants. Permitted fixed laying on crane and machine elements etc. Permitted voltages up to 1000 V AC at protected laying in tubes or devices, and as connecting rotor cable for engines. Also suitable for cooling installations. Resistant to oil, ozone and UV irradiation
STANDARDS:
Q/320481SS058-2012, GB/T12706.1, IEC60502-1, AS/NZS5000.1, etc.
CONSTRUCTION
Conductor: bare copper or tinned copper, class 1 (≤6mm2), or class 2, or class 5, as per IEC60228
Insulation: XLPE
Screen: copper tape(CTS), or
copper wire + copper tape(CWS+CTS), or
bare/tinned copper wire braided (BCWB/TCWB), or
Aluminium-Foil + TCWB, or
Copper tape + copper wire braided (CTS + CWB)
Inner covering(optional): lapped binder tape or extruded Polyvinyl Chloride (PVC)
Armour(optional): galvanized steel tape(DSTA), or galvanized round steel wire(SWA)
Outer sheath: Polyvinyl Chloride (PVC)
Note: extruded inner sheath and armour layer is not applicable for non-armoured cable.
Cable suitable for fixed industrial and home installation, for operating conditions with possible fire or explosion hazard, for mobile energy users, machine tools and agricultural machines, for construction sites at medium mechanical loads, for large kettles, heating plates, hand lamps, electrical tools such as drills, circular saws and electrical tools for household use, same as for mobile engines or machines on construction sites and craftsman i.e. agricultural plants. Permitted fixed laying on crane and machine elements etc. Permitted voltages up to 1000 V AC at protected laying in tubes or devices, and as connecting rotor cable for engines. Also suitable for cooling installations. Resistant to oil, ozone and UV irradiation
STANDARDS:
Q/320481SS058-2012, GB/T12706.1, IEC60502-1, AS/NZS5000.1, etc.
CONSTRUCTION
Conductor: bare copper or tinned copper, class 1 (≤6mm2), or class 2, or class 5, as per IEC60228
Insulation: XLPE
Screen: copper tape(CTS), or
copper wire + copper tape(CWS+CTS), or
bare/tinned copper wire braided (BCWB/TCWB), or
Aluminium-Foil + TCWB, or
Copper tape + copper wire braided (CTS + CWB)
Inner covering(optional): lapped binder tape or extruded Polyvinyl Chloride (PVC)
Armour(optional): galvanized steel tape(DSTA), or galvanized round steel wire(SWA)
Outer sheath: Polyvinyl Chloride (PVC)
Note: extruded inner sheath and armour layer is not applicable for non-armoured cable.
