Audited Supplier
Fine wire drawing machine with annealing is special for drawing and annealing copper wires.
The finished wire is wound by 300 steel bobbin.1). Wire Quantity: 1 Wire
2). MAX.Inlet Wire: 0.5- 1.2 mm
Outlet Wire: 0.15-0.35 mm
3). Raw Material: Pure Copper or Brass Wire
Item | Data |
Machine type | SY-DT24 |
Inverter control | Dual inverter control |
Drawing dies No./max. | 24 |
Inlet diameter | Ø 0.5- 1.2mm |
Out diameter | Ø0.15- 0.35mm |
Max.Drawing line speed | 1800m/min |
Slip ratio of m/c | 13% |
Fix speed capstan slip ratio | 8% |
Frame | Welded by steel plate |
Capstan | Ceramic plasma capstan |
Main motor | 15kw |
Spooler motor | 4kw |
1). Double inverters can keep the outlet wire precisely tensioned and the slip ratio of wire will be reduced to the minimum.
2). Third-section-annealing system, outside electrically neutral (no current flow to another unit)
3). The machine's body and other key components and parts are produced by our own factory, and quality is reliable.
Mentors is a professional manufacturer and exporter of wire drawing machines & cable making machines in the wire and cable field since 2008, It is successful in making all kinds of high-speed wire drawing machines, annealing and tinning machines, double twist bunching machines, extruders, etc.
Mentors Group is able to provide a whole solution. Also our engineering team with 23 years of R&D and production experience in the field of wire drawing machines and other cable-making machines. A cost-effective, highly efficient, reliable, and easy-to-operate machine is what we deliver. The independent research and development of the Copper Wire Drawing Machines have already been supplied to world well-known companies such as Sumitomo, and Jiangxi Copper Corporation(Fortune Global 500 companies). And New Design Remote Controlled Full Automatic cable making equipment, which can load and unload bobbin without an operator, to help our customers develop faster. Our products have been exported to many countries. Such as Russia, Vietnam, India, Iran, Pakistan, Ethiopia, Brazil etc.
Mentors will continue to combine the advanced technology with China's manufacturing advantage and provide wire drawing machines and cable manufacturing machines with European Standards to worldwide customers.
Q1: What's the payment terms?
A1: Standard type is 30% T/T as deposit, 70% T/T before shipping.
Q2: How about the after-sell service?
A2: The engineer will be dispatched as needed.
Q3: How much need pay for after-sell service?
A3: The buyer provides the engineer's round-trip flight tickets, board and lodging, security as well and each person's daily wage.
Q4: Can you support a complete project instead of a single machine?
A4: Yes, besides the machine, the whole solutions for raw materials, auxiliary parts, worker training, etc. can be offered.
Q5: What kind of Guarantee you can offer?
A5: 12 months since shipping date and charge for repair the whole life.
