Environmentally Friendly Air Cooler for Indoor Use

Indoor air cooler is an environmentally friendly and energy-saving air conditioning equipment that integrates cooling, ventilation, and dehumidification. Its working principle is to force the air in the cold storage to flow through the cooling exhaust pipe through the axial flow fan, exchange heat, and cool the air, thereby reducing the temperature of the storage. Widely used in various cold storage and refrigeration environments, suitable for industries such as food processing, pharmaceutical production, and chemical storage.

Product Features
1. Completely environmentally friendly product: The air cooler is an environmentally friendly product without compressor, cold coal, and pollution. It uses the principle of outdoor fresh air evaporation cooling to cool down and exchanges air with the indoor through convection, achieving the purpose of indoor ventilation and cooling;

2. Low operating cost: Compared with traditional compressor air conditioning series, the power consumption of the air cooler is only 1/8-1/10;

3. Significant cooling effect: In humid areas, a noticeable cooling effect of around 5-9 ºC can generally be achieved;
In particularly hot and dry areas, the temperature drop can reach about 10-15 ºC;

4. Low investment cost: Compared with traditional compressor air conditioning systems, the cost of air coolers is less than half, and the equipment does not occupy any building area;

5. Keeping indoor air clean, hygienic, and hygienic: Opening doors and windows for ventilation is a major feature of evaporative air coolers. The 100% fresh air replacement method keeps people in a natural environment at all times, completely expelling polluted air outdoors without any discomfort caused by traditional air conditioning;

6. Easy to maintain and install: The air cooler system is simple, easy to install and maintain quickly, and does not require professional maintenance personnel.

Technical description of air cooler:
1. Shell:
Made of embossed aluminum or galvanized steel plate, coated with pure white plastic; Anti corrosion, anti-collision, and scratch resistant;

2. fin coil:
Copper pipes are arranged in a staggered pattern of 15.8mm, with a distance of 52mm × 45mm between pipes and sheet spacing of 4.5mm (ATR-H), 6mm (ATR-D) or 9mm (ATR-E);

3. fan components:
Low noise axial flow fan with internal rotor, fan blades made of aluminum or galvanized copper, balanced and adjusted before leaving the factory;

4. defrosting heating and protection components:
Made of 8.8mm stainless steel sleeve for electric heating tube; Safe defrosting thermostat (disconnected at 25 ºC, connected at+3 ºC).