Audited Supplier
EP
EP150
Rubber
Polyester
Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
Strong
3-10
Ep100 Ep125 Ep150 Ep200 Ep250 Ep300
ISO9001 BV SGS
400-2200mm
HUAYUE
PVC Water Proof Cloth
SGS BV ISO
Baoding City Hebei Province China
40101200
Product Description
EP conveyor belt with multi-ply fabric
Features:
Good flexibility, groove formation property and cost-effective. It is mainly used to transport powder,small and medium granular or less wearing materials at common temperature.
Structure:
It uses multi-layer cotton canvas or terylene cotton canvas as carcass and finished through the processes of calendering,firming and vulcanizing,etc
Conveying small and not large massiveness materials, meanliness materials and biscuit materials. Applicable for conveying long and not very long distance materials, weight materials and materials that is vey long and its sliding rate is very fast.
Detailed Product Description
1.plies:3-10ply
2:width:400-2200mm
3.thickness:8-30mm
4.Tensile Strength: 9-25MPA
5.quality control:ISO9001:2008,BV
6. high-performance characteristic:resistance to abrasion
Features:
Good flexibility, groove formation property and cost-effective. It is mainly used to transport powder,small and medium granular or less wearing materials at common temperature.
Structure:
It uses multi-layer cotton canvas or terylene cotton canvas as carcass and finished through the processes of calendering,firming and vulcanizing,etc
Conveying small and not large massiveness materials, meanliness materials and biscuit materials. Applicable for conveying long and not very long distance materials, weight materials and materials that is vey long and its sliding rate is very fast.
Detailed Product Description
1.plies:3-10ply
2:width:400-2200mm
3.thickness:8-30mm
4.Tensile Strength: 9-25MPA
5.quality control:ISO9001:2008,BV
6. high-performance characteristic:resistance to abrasion
Physical Properties of Rubber Cover (before aging) of EP Nylon Conveyor Belt
| Grade | Tensile Strength/Mpa ≥ | Breaking Elongation/% ≥ | Abrasion Loss/mm3 ≤ |
| H | 24 | 450 | 120 |
| D | 18 | 400 | 100 |
| L | 15 | 350 | 200 |
Note: Grade H-used for transporting sharp, abrasive materials which can damage belts badly. Grade D-used for transporting highly abrasive materials. Grade L-used for transporting medium-abrasion materials. | |||
After-aging properties of rubber cover(70ºC, 7days):
Tensile strength and breaking elongation are both not lower than 75% of before-aging values.
Full-thickness Tensile Properties
a. Longitudinal tensile strength, not less than the below table. (N/mm)
| Nominal belt type | 160 | 200 | 250 | 315 | 400 | 500 | 630 |
| 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 3150 |
b. Full thickness, longitudinal elongation at reference force, not more than 4%.
c. Ply adhesion:
| Item | Ply to ply | Rubber cover to ply | |
| Rubber cover thickness ≤1.5mm | Rubber cover thickness >1.5mm | ||
| All samples average value/ (N/mm) ≥ | 4.5 | 3.2 | 3.5 |
| All samples min peak value/ (N/mm) ≥ | 3.9 | 2.4 | 2.9 |
| Note: All samples max peak value is not more than 20N/mm. | |||
d. Straightness not more than 25mm
