Audited Supplier
EUP150/200A-1H12/24/48V-0
Light, Construction, LED Lighting
Single
LED Regulator Voltage
PWM Controlled
CE, RoHS, CCC
Constant Voltage Source
PWM
Step-down Type
220-240V AC
SMD
ABB
220-240VAC
12/24/48V
>95%
0-10V
IP20
Touch Dim
EUCHIPS
Cardboard Box
213*54*33MM
Suzhou, China
8504401400
Product Description
Features
· Single channel constant voltage output
· Support a variety of dimming mode(DALI/1-10V active signal/adjustable resistance/PWM/Touch DIM)
· High range of input voltage 220VAC ~ 240VAC
· Built-in active PFC function
· Dimming effect smooth, no flicker
· Over temperature protection; Over voltage protection; Short circuit protection
· Suitable for indoor LED lighting application, such as LED strips, spot light, wall washer,and so on
150W 24VDC 0/1-10V CV Driver EUP150A-1W24V-1
Technical Parameters
Model | EUP150A-1H24V-1 | |
|
Input | Efficiency | 93%@230VAC, Full load |
| Voltage | 100VAC-240VAC | |
| Frequency Range(Hz) | 50/60Hz | |
| Power Factor | ≥0.95@230VAC, Full load | |
| THD | <10%@230VAC, Full load | |
| Current | 1.75Amax@100VAC | |
| Inrush Current | Cold start,51.2A 480uS@230VAC | |
| Standby power | ≤1W | |
| No load power | ≤1W | |
| Inrush current | ≤ 1 s, at100Vac ( When the light begins to shine ) | |
|
Output | Current / Voltage / Power | 6.25A/24VDC/150W |
| Output Voltage | ±5% | |
| Current Accuracy | ±3% | |
| Ripple current | ±5% | |
| No load output voltage | 25.2V max | |
| Function | Dimming type | 0/1-10V |
| Dimming range | 0%-100% | |
| Dimming curve | Logarithm | |
| Protection | Over load | No output, troubleshooting self-recovery |
| Short circuit | No output, troubleshooting self-recovery | |
| Over Current | No output, troubleshooting self-recovery | |
|
Safety&EMC | Surge | L-N 1000VAC N-PE2000V L-PE2000V |
| Withstand Voltage | I/P-O/P: 3750VAC/1min/5mA ; I/P-GND: 1500VAC/1min/5mA ; O/P-GND : 500VAC/1min/5mA | |
| Safety standards | IEC/EN62384,IEC/EN61347-1, IEC/EN61347-2-13, GB19510.1, GB19510.14 | |
| EMC Eission | EN61000-4-2, 3, 4, 5, 6, 8, 11; EN55015, EN61000-3-2; GB17626.3, 4, 5, 6, 8, 11; GB17743 GB17625.1, 2 | |
| Insulation Resisance | 5MΩ | |
|
Others | Working temp. | -30ºC~50ºC |
| Storage Temp., Humidity | -40ºC~85ºC 20-90%RH | |
| Tc | 70ºC | |
| Material | Metal | |
| IP rating | IP20 | |
| Lifetime | 30,000h @tc:70ºC | |
| Warranty | 3 year | |
| Switch cycle | >15,000 times | |
| Packing size | Net weight: 650g±5%/PCS; 18PCS/Carton; 12.2kg±5%/ box; Outer box size: 303*221*265mm(L * W * H) | |
| Dimension | 206*75*40mm (L * W * H) | |
200W 12VDC Constant Voltage DALI&0/1-10V Driver EUP200AD-1H12V-0
Technical Parameter
| Model | EUP200AD-1H12V-0 | |
| Input | Efficiency | ≥88.5%@230VAC,Full load |
| Voltage | 220VAC-240VAC | |
| Frequency Range(Hz) | 50/60Hz | |
| Power Factor | ≥0.95@115VAC,Full load | |
| THD(full load) | <10%@230VAC, Full load | |
| AC Current(max) | 1.1Amax@230VAC | |
| Inrush Current(max) | Cold start,28A(twidth=1250us measured at 50% Ipeak) @230VAC | |
| Output | Current / Voltage / Power | 16.6A/12VDC/200W |
| R & N (Max) | 200mVp-p | |
| Channel | 1 | |
| Voltage Accuracy | ±3% | |
| Function | Dimming Type | DALI/Touch DIM/1-10V/Adjustable resistance /PWM |
| Dimming Range | 0.1%-100% Dimming to off | |
| Protection | Over voltage | Close the output, restart to recover since fault condition is removed for 10s |
| Over temperature | Close the output, restart to recover since fault condition is removed for 10s | |
| Short Circuit | Hiccup, recovers after fault condition is removed | |
| Safety & EMC | Surge | L-N:1KV |
| Withstand Voltage | I/P-O/P: 3000VAC/1min/5mA | |
| DALI Standard | IEC 62386-101: 2014, IEC 62386-102: 2014; IEC 62386-207: 2009, DALI 21.0 | |
| Safety Standards | EN61347, GB19510 | |
| EMC Eission | EN50515, EN61000-3-2 | |
| EMC Immunity | EN61000-4-2, 3, 4, 5, 6, 8, 11; EN61547 | |
| Others | Working Temp. | -20ºC~50ºC |
| Storage Temp., Humidity | -40ºC~85ºC, 20-90%RH | |
| tc | 90ºC | |
| Material | Metal | |
| IP Rating | IP20 | |
| Lifetime | 50,000h@tc:80ºC | |
| Warranty Condition | 3 years | |
| Switch Cycle | >15,000 times | |
| Packing(weight) | Net weight: 860g±5%/PCS; 10PCS/Carton;9.1kg±5%/Carton; Carton Size: 333*268*150mm(L*W*H) | |
| Dimension | 310*60*45mm(L*W*H) | |
200W 24VDC Constant Voltage DALI&0/1-10V Driver EUP200AD-1H24V-0
200W 48VDC Constant Voltage DALI&0/1-10V Driver EUP200AD-1H48V-0
Technical Parameter
| Model | EUP200AD-1H24V-0 | |
| Input | Efficiency | ≥90%@230VAC,Full load |
| Voltage | 220VAC-240VAC | |
| Frequency Range(Hz) | 50/60Hz | |
| Power Factor | ≥0.95@115VAC,Full load | |
| THD(full load) | <10%@230VAC, Full load | |
| AC Current(max) | 1.1Amax@230VAC | |
| Inrush Current(max) | Cold start,50A(twidth=200us measured at 50% Ipeak) @230VAC | |
| Output | Current / Voltage / Power | 8.3A/24VDC/200W |
| R & N (Max) | 3% | |
| Channel | 1 | |
| Voltage Accuracy | ±3% | |
| Function | Dimming Type | DALI/Touch DIM/1-10V/Adjustable resistance /PWM |
| Dimming Range | 0.1%-100% Dimming to off | |
| Protection | Short Circuit | No-output, recovers after fault condition is removed |
| Over load | No-output, recovers after fault condition is removed | |
| Safety & EMC | Surge | L-N:1KV LN-GND:2KV |
| Withstand Voltage | I/P-O/P: 3000VAC/1min/5mA | |
| DALI Standard | IEC 62386-101: 2014, IEC 62386-102: 2014; IEC 62386-207: 2009, DALI 1.0 | |
| Safety Standards | EN61347, GB19510 | |
| EMC Eission | EN50515, EN61000-3-2 | |
| EMC Immunity | EN61000-4-2, 3, 4, 5, 6, 8, 11; EN61547 | |
| Others | Working Temp. | -20ºC~50ºC |
| Storage Temp., Humidity | -40ºC~85ºC, 20-90%RH | |
| tc | 85ºC | |
| Material | Metal | |
| IP Rating | IP20 | |
| Lifetime | 50,000h@tc:85ºC | |
| Warranty Condition | 5 years | |
| Switch Cycle | >25,000 times | |
| Packing(weight) | Net weight: 860g±5%/PCS; 10PCS/Carton;9.1kg±5%/Carton; Carton Size: 333*268*150mm(L*W*H) | |
| Dimension | 310*60*45mm(L*W*H) | |
200W 48VDC Constant Voltage DALI&0/1-10V Driver EUP200AD-1H48V-0
Technical Parameter
| Model | EUP200AD-1H48V-0 | |
| Input | Efficiency | ≥92%@230VAC,Full load |
| Voltage | 220VAC-240VAC | |
| Frequency Range(Hz) | 50/60Hz | |
| Power Factor | ≥0.95@115VAC,Full load | |
| THD(full load) | <10%@230VAC, Full load | |
| AC Current(max) | 1.1Amax@230VAC | |
| Inrush Current(max) | Cold start,50A(twidth=200us measured at 50% Ipeak) @230VAC | |
| Output | Current / Voltage / Power | 4.16A/48VDC/200W |
| R & N (Max) | 3% | |
| Channel | 1 | |
| Voltage Accuracy | ±5% | |
| Function | Dimming Type | DALI/Touch DIM/1-10V/Adjustable resistance/PWM |
| Dimming Range | 0.1%-100% Dimming to off | |
| Protection | Short Circuit | No-output, recovers after fault condition is removed |
| Over load | No-output, recovers after fault condition is removed | |
| Safety & EMC | Surge | L-N:1kV; LN-GNG:2KV |
| Withstand Voltage | I/P-O/P: 3000VAC/1min/5mA | |
| DALI Standard | IEC 62386-101: 2014, IEC 62386-102: 2014; IEC 62386-207: 2009, DALI 2.0 | |
| Safety Standards | EN61347, GB19510 | |
| EMC Eission | EN50515, EN61000-3-2 | |
| EMC Immunity | EN61000-4-2, 3, 4, 5, 6, 8, 11; EN61547 | |
| Others | Working Temp. | -20ºC~50ºC |
| Storage Temp., Humidity | -40ºC~85ºC, 20-90%RH | |
| tc | 70ºC | |
| Material | Metal | |
| IP Rating | IP20 | |
| Lifetime | 50,000h@tc:70ºC | |
| Warranty Condition | 5 years | |
| Switch Cycle | >25,000 times | |
| Packing(weight) | Net weight: 860g±5%/PCS; 10PCS/Carton;9.1kg±5%/Carton; Carton Size: 333*268*150mm(L*W*H) | |
| Dimension | 310*60*45mm(L*W*H) | |
A) How could I get a sample?
Before we received the first order, please afford the sample cost and express fee. We will return the sample cost back to you within your first order.
B) Lead time?
Existing items: Within 1 day after payment received.
New items:About 4-6 weeks after payment received.
C) Whether you could make our brand on your products?
Yes. We can print your Logo on both the products and the packages if you can meet our MOQ.
D) Whether you could make your products by our color?
Yes, The color of products can be customized if you can meet our MOQ.
E) How to guarantee the quality of your products?
1) Strict detection during production.
2) Strict sampling inspection on products before shipment and intact product packaging en
