Audited Supplier
General Information
TaFlux ETV series ultrafiltration (UF) membrane module TFETV-60 is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.
Features
- Outside-to-inside flow direction
- New generation PVDF hollow fiber
- Nominal pore size of 0.025 μm
- Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU
Advantages
- High quality raw material
- High thermal and chemical solvent resistance
- High chemical tolerance for cleaning
- Optimized design, high resistance to fouling
- Economical analogues as direct replacement of EuroTec ETUF-9060R
Applications
- Surface water
- Potable water
- Pre-treatment of seawater desalination
- Pre-treatment of industrial water
- Industrial wastewater
Module Dimensions
| Model | L | L1 | D | D1 | Feed, Filtrate, Concentrate |
| TFETV-60 | 2,340 mm (92.13 inch) | 316 mm (12.44 inch) | 344 mm (13.54 inch) | 216 mm (8.5 inch) | 1.5" FNPT |
Specifications
| Model | TFETV-60 | ||
| Effective membrane area m² (ft²) | 60 (645) | ||
| Membrane material | PVDF (Polyvinylidene Fluoride) | ||
| Fiber ID/OD | 0.7/1.3 mm (0.02/0.05 inch) | ||
| Flow direction | Outside-in | ||
| Pore size | 0.025 μm | ||
| Bacteria removal | > 99.9999% | ||
| Housing material | UPVC | ||
| End caps material | UPVC | ||
| Potting material | Polyurethane resin | ||
| O-rings material | EPDM | ||
| Dry weight | 60 KG (132 lbs) | ||
| Wet weight filled with water | 100 KG (221 lbs) | ||
Operating and Cleaning Limits
| Type of operation | Dead-end flow or cross flow |
| Design flux (25°C) | 60 - 120 L/m2·h (35 - 71 gfd) |
| Temperature | 5 - 40°C (41 - 104°F) |
| Maximum feed pressure (20°C) | 2.5 bar (36.2 psi) |
| Maximum trans-membrane pressure | 2 bar (29 psi) |
| Backwash flux (25°C) | 80 - 120 L/m2·h (48 - 71 gfd) |
| Maximum backwash pressure | 2 bar (29 psi) |
| Maximum air scour feed pressure | 2.5 bar (36.2 psi) |
| Maximum air scour flow | 4 - 12 Nm3/h (2.4 - 7.1 scfm) |
| pH continuous operation @ 25°C | 2 - 11 |
| pH cleaning @ 25°C | 1 - 12 |
| Maximum NaClO (continuous operation) | 30 mg/L |
| Maximum NaClO (cleaning) | 5,000 mg/L |
| Maximum feed TSS | 100 ppm |
| Maximum feed turbidity | 300 NTU |
| Maximum feed particle size | 300 µm |
| Filtrate SDI15 | ≤ 2.5 |
| Filtrate turbidity | ≤ 0.1 NTU |
ISO 9001:2015 Quality Management Systems Certificate
TÜV Audit Certificate
Export License
Certificate of Origin
1. Customer-centric company culture
2. Efficient and flexible organizational system
3. 20+ years experience in membrane research, development and manufacturing
4. Better cost-effectiveness
1. Warranty granted.
2. Remote technical training, guidance and support.
3. On-site technical support for training, installation, commissioning, operation and trouble shooting.
4. Free replacement in warranty period.
Feedback Handling Process as below:
Picking up the phone and having the plant manager yelling at you about undelivered membranes and filters?
Your customers are complaining to you about the high costs of existing membranes and filters?
Feel frustrated in prices when you are bidding?
Send your inquiry to us and get a quote for your project now!
