Audited Supplier
Remote control trench roller RWYL202C
Remote control trench roller is self-developed by our company. With several national patents, this product fills the national gap.
1. The remote controller control start, stop, forward/backward, steering, vibrating, and water, etc.
2. It is very safe for operator, especially used in the limited and dangerous area.
3. Famous engine.
4. Hydraulic drive, vibration & steering.
Type | YL202C |
Run |
|
Speed | 1.2km/h(low) 2.4km/h(high) |
Turning radius | 1700mm |
Climbing capacity in theory | 50% |
Compaction |
|
Static load forward/back | 98/90N/cm |
Nominal amplitude | 1.7mm |
Vibration frequency | 42Hz |
Exciting force | 70kN/35kN(Hydraulic control) |
Engine |
|
Model | YANMAR |
Type | Diesel engine, water cooled, 4stroke, three cylinder |
Power | 20hp/3000rpm |
Fuel tank volume | 30L |
Lubricant L | 2.2L |
Fuel consumption | 281g/kWh |
Dimension |
|
Width of steel wheel | 600mm/850 mm |
Diameter of steel wheel | 520mm |
Tread | 1000mm |
Total length | 1900mm |
Total width | 850mm |
Total height | 1300mm |
Packing size | 2030x950x1460mm |
Weight |
|
MAX. working weight | 1635kg |
Related Products
Our Factory
| Hot Products |
| | | |
| Excavator | Surface Finishing Screed | Concrete Vibrator | Power Trowel |
| | | |
| Remote Control Trowel | Concrete Mixer | Plate Compactor | Compactor Machine |
| | | |
| Drywall Sander | Steel Bar Cutter | Vibratory Roller | Steel Bar Bender |
| 1. Do you guarantee safe and secure delivery of products? Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge. |
| 2. Can you supply the relevant documentation? Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required. |
3. What is the average lead time? For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when we have received your deposit, and we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so. |
