


Description | Unit | M1432B |
General Capacity | ||
Max.length ground (O.D) | mm | 1000, 1500, 2000, 3000 |
Center height | mm | 180 |
Dia.Ground (O.D) | mm | 8-320 |
Dia.Ground (I.D) | mm | 30-100 |
Max.length ground (I.D) | mm | 125 |
Max.weight of work piece | kg | 150 |
Workhead | ||
Swiveling angle | ° | +90° |
Center taper (MT) | MT | 4 |
Spindle speed/Stepless | r/min | 50HZ 26-260 |
Wheelhead | ||
Max. dimension of wheel (OD*W*ID) | mm | 400x50x203(1000,1500) 500x50x203(2000,3000) |
Wheel peripheral velocity | m/s | 35 |
Hand feed per.rev | mm | rough: 2 |
fine: 0.5 | ||
Hand feed per.gra | mm | rough:0.01 |
fine:0.0025 | ||
Internal grinding device | ||
Spindle speed | r/min | 10000 |
Dimension of wheel | mm | max. 50x25x13 |
min. 17x20x6 | ||
Table | ||
Max. swiveling angle of table (Cockwise) | ° | 3° |
Max. swiveling angle of table ( Anticlockwise) | ° | 7°(1000)6°(1500)5°(2000)3°(3000) |
Longitudinal speed range of table | m/min | 0.1-4 |
Tailstock | ||
Center tape (MT) | (MT) | 4 |
Quill travel | mm | 30 |
Motor | ||
Wheelhead motor power | kw | 5.5(1000,1500) 7.5(2000,3000) |
Internal grinding | kw | 1.1 |
Workhead motor power | kw | 1.5 |
Machining accuracy | ||
Roundness | μm | 3(1000,1500,) 5(2000,3000) |
Cylindricity | μm | 8(1000,1500) 10(2000,3000) |
Roughness | μm | Ra0.2 (1000,1500) Ra0.32(2000,3000) |
Machine | ||
Gross weight | t | 4.6(1000) 5.1(1500) 5.7(2000) 7.1(3000) |
Packing dimension | cm | 326x190x205 (1000) |
426x190x205 (1500) | ||
530x190x205 (2000) | ||
730x190x205(3000) |
Please tell me your specifications (or send your workpiece drawing to us) ,we can choose the best model for you , or you can choose the exact model . You can also send us the products drawing ,we will choose the most suitable machines for you .
2: What's your main products of your company?
We specialized in CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Drilling Machine ,Radial Drilling Machine ,Band Saw Machine ,Sharper machine and so on .
3: How long is the delivery time?
For standard machines,it would be around 30 days;For non-standard machines and customized machine according to client's specifications requirements,it would be a little longer.
4.Where is our factory located? How can I visit there?
5. What is your trade terms?
FOB, CFR and CIF all acceptable.
6: What's the Payment Terms?
T/T ,30% initial payment when order ,70% balance payment before shipment ; Irrevocable LC at sight .
7: What's the MOQ?
1 set .(Only some low cost machines will be more than 1 set ).