Extracorporeal Shock Wave Lithotripter (ESWL-BI)

SPECIFICATIONS
1. Shock source: Electromagnetic ( ESWL-BI)
(1) Reflector: Second focal point and the generator surface ≥ 135mm
Realize the high efficient lithotripsy with low voltage.
(2) Lens
Discharge the electrode, it's easy to wear off and should be replaced before each therapy of a new patient.
(3) Focal point: X axis: DiameterY axis: ≤ ± 7mmZ axis: ≤ ± 80mm
(4) Shock wavePulse width: 1μ S Wave front: 0.5μ S
(5) Operating voltage: 14-18KV Shock energy: 98-144.5J±
The travel range of the reflector: Back and fore: 240± 2mmRight and left: 240± 2mmUp and down: 240± 2mm parallelly: 100mm

2. Integrative Main Frame and Drawer Style Console
(1) Electrical source: 220V Continuance: ≤ 1A Pulse: ≤ 3A
(2) Small volumeArea required of the therapy room: ≥ 12sq. M.
(3) Ultrasound diagnosing device can be emplaced next to the ultrasound localization system, thus realizing two usages in one machine.
(4) the biggest advantage of electromagnetic shockwave device is its long service life, which is over 100 thousand (105)times.

3. Integrative Main Frame and Drawer Style Console
(1) Small volumeArea required of the therapy room: ≥ 12sq. M. (2) Ultrasound diagnosing device can be emplaced next to the ultrasound localization system, thus realizing two usages in one machine.

MAIN ACCESSORIES
Electromagnetism Panel, Lens
The biggest advantage of electromagnetic shockwave device is its long service life, which is over 100 thousand (105)times.

Water Pocket
Water pocket is made of emulsoid product. It must be washed up by fresh water and hung in cool-shade place for drying. Be sure not to let it have a chance to touch orgunise_solvent petrol etc.

3. H. V. Capacitor0.5µ F
H. V. Charge range: 14-18KV
H. V. Power storage range: 18-50J

4. Discharge Tube
5. Electrode: Sharp touch with the same tip of two electrode as the pattern of electrode as the pattern of electrode discharge, discharge times≥ 2000. Electrodes gap in no more than 3mm, the deviation of diameter direction of both touching tip is no more than 1 mm.